V80213MA08QE C&K

Slide V Series Power & Line Voltage Select Slide Switches Features/Benefits Typical Applications Ratings up to 10 AMPS Appliances Snap-in panel and PC mounting Actuators with screwdriver slot Quick connect terminals available RoHS compliant Specifications Materials CONTACT RATING: 10 GPA 125 V AC 50/60 Hz T85 HOUSING: 6/6 nylon (UL94V-2), black. I 5 GPA 250 V AC 50/60 Hz T85 TOP PLATE: 6/6 nylon (UL94V-2), black. 2 (0.5)A 250 VAC 50/60 Hz T85 ACTUATOR: Glass filled polyester (UL94V-0), 01 and 02 styles, 4RA 30 VDC T85 black (standard) 12, 13 and 14 styles, red (standard). ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACTS: Copper, silver plated. CONTACT RESISTANCE: Below 10 m typ. initial TERMINALS: Copper, silver plated. 2-4 V DC, 100 mA. CONTACT SPRING: Music wire or stainless steel. 9 INSULATION RESISTANCE: 10 min. TERMINAL SEAL: Epoxy. DIELECTRIC STRENGTH: 1,000 Vrms min. sea level. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. OPERATING TEMPERATURE: 30C to +85C. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I34 through I36. For additional options not shown in catalog, consult Customer Service Center. Switch Function V802 DPDT V701 SPST Actuator V702 SPDT 12 Screwdriver slot V801 DPST 01 .290 high 02 .290 high with markings 13 Screwdriver slot 14 Screwdriver slot with markings Mounting Style SS Panel with mounting ears MA Right angle, PC thru-hole Terminations MS PC Thru-hole 05 Quick connect S2 Snap-in panel 02 PC thru-hole SL Right angle, panel with 08 Right angle PC thru-hole mounting ears Contact Material Q Silver Seal NONE No seal E Epoxy seal Dimensions are shown: Inches (mm) Specifications and dimensions subject to change www.ckswitches.com I33V Series Power & Line Voltage Select Slide Switches SWITCH FUNCTION AVAILABLE AVAILABLE NO. MODEL SWITCH MOUNTING NO. MODEL SWITCH MOUNTING POLES NO. FUNCTION SCHEMATIC STYLES POLES NO. FUNCTION SCHEMATIC STYLES V701 SPST ALL V801 DPST ALL SP V702 SPDT ALL DP V802 DPDT ALL All models with all options. Contacts make on side actuator thrown. ACTUATOR I 12SCREWDRIVER SLOT 01 .290 HIGH 02.290 HIGH 13SCREWDRIVER SLOT 14SCREWDRIVER SLOT WITH MARKING WITH MARKINGS NO MARKING WITH MARKINGS Markings are reversed on Actuator color is red with white Actuator color is black. markings are reversed on V702 Actuator color is red. V702 and V802 models. Note: Orientation of 115V-230V markings (std.). and V802 models. Actuator color Actuator color is red with actuator markings is black with white markings (std.). white markings (std.). and terminals. MOUNTING STYLE SSPANEL WITH MOUNTING EARS PANEL MOUNTING V80212SS05Q AVAILABLE WITH: DPDT Models: All. Terminations: 02 and 05 MARIGHT ANGLE, PC THRU-HOLE AVAILABLE WITH: Models: All Terminations: 08 PC MOUNTING PC mount, side actuated. For mounting information, see TERMINATIONS section, page I-36. V80212MA08Q Horizontal Actuation DPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change www.ckswitches.com I34 Slide