NOW PART OF H-Series Hydraulic-Magnetic Circuit Breaker PRODUCT WEBPAGE request sample, configure part Compact and IEC Compliant for Global Markets The H-Series is a compact hydraulic-magnetic circuit breaker, meeting IEC spacing requirements for global market applications. It features a trip free mechanism, which will open the contacts when a fault condition occurs, even if the handle is held in the ON position. It fits both general and full amp load conditions, offering a choice of terminal options and handle or rocker actuators. The H-Series is rated up to 35 amps with a maximum voltage of 250VAC/65VDC or 80VDC for single pole configurations and a max IC of 3,000 amps. 1-3 1-35 80 250 Poles Amps VDC Max VAC Max Typical Applications Datacom/Telecom Marine www.carlingtech.com 860.793.9281 sales carlingtech.comTech Specs Electrical Typical Protector Resistance Maximum Voltage 250VAC 50/60Hz 80 VDC DCR and Impedance values are based on measurements by the voltmeter ammeter method. Rated current is applied Current Ratings Standard current coils: 1.00, 2.50, for one hour at a voltage not less than 20 volts. Ambient 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, temperature: 25 Tolerance: Below 10 amps +/- 25% 30.0, 32.0, 35.0 Above 10 amps +/-35% SPDT: 10.1A-250VAC, Auxiliary Switch Rating 1.0A-65VDC/0.5A-80VDC, Impedance Chart Auxiliary Switch Rating 1.0A-65VDC/0.5A-80VDC, 0.1A-125VAC (with gold contacts) Series Current Rating (Amps) DC-Ohms 50/60Hz-Ohms Mechanical 1 0.85 0.87 2.5 0.13 0.15 Endurance 10,000 ON-OFF operations 6 5 0.035 0.036 per minute with rated current & voltage 7.5 0.018 0.019 10 0.010 0.011 15 0.006 0.0061 Physical 20 0.005 0.0051 25 0.003 0.0035 Number of poles 1-3 30 0.0025 0.0026 Weights Approx. 48 grams/pole (1.7 oz) 35 0.0021 0.0022 Internal Circuit config. Series and Switch Only (with or without auxiliary switch) Agency Approvals UL Recognized under the Component Recognition Program as Protectors, Supplementary (Guide QVNU2 File E75596) UL standard 1077 CCC certified, Certificate No. 2010010307447291 CSA Accepted Supplementary Protector CSA standard C22.2 No. 235 TUV certified to EN60934, Certificate No. R50204086 Tables Table A: Lists UL Recognized, CSA Accepted and TUV Certified configurations and performance capabilities as a Component Supplementary Protector. Component Supplementary Protectors Voltage Current Rating Short Circuit Capacity (Amps) Application Codes Circuit Minimum UL CSA TUV Max Full Load Configuration Poles Frequency Phase Without Without (Icn) Without Rating Amps UL CSA Backup Fuse Backup Fuse Backup Fuse 65 DC --- 1 - 25 1 3000 3000 3000 TC1, OL1, U1 TC1, OL1, U1 65 DC --- 26 - 35 1 3000 3000 3000 TC1, OL1, U3 TC1, OL1, U3 80 DC --- 1 - 25 1 1000 1000 1000 TC1, OL1, U1 TC1, OL1, U1 1 80 DC --- 26 - 35 1 1000 1000 1000 TC1, OL1, U3 TC1, OL1, U3 Series 250 50 / 60 1 1 - 35 1 1500 1500 500 TC1, OL1, U1 TC1, OL1, U3 250 50 / 60 1 1 - 35 2 1500 1500 500 TC1, OL1, U3 TC1, OL1, U3 250 50 / 60 3 1 - 35 3 1500 1500 500 TC1, OL0, U3 TC1, OL0, U3 Notes: 1 Polarity Sensitive 2. *Manufacturer reserves the right to change product specification without prior notice.