NOW PART OF J-Series Hydraulic Magnetic Circuit Breaker PRODUCT WEBPAGE request sample, configure part, watch video Compact Size, Designed for High Power Density Applications The J-Series is a compact hydraulic-magnetic circuit breaker featuring a 10,000 amp maximum interrupting capacity, making it ideally suited for high power density applications. This low profile circuit breaker offers a variety of actuator styles and terminal options. The J-Series is available in one to three poles with ratings from 1 to 20 amps, up to 240VAC and a max IC of 10,000 amps 5,000 amps TUV. 1-3 1-20 240 Up to 10,000AIC Poles Amps VAC Max Short Circuit Capacity Typical Applications Datacom/Telecom, AC Power Supplies, Marine Applications Requiring AC Power Distribution Units Power Dense Motors & Controls High Interrupting Capacity www.carlingtech.com 860.793.9281 sales carlingtech.comTech Specs Electrical Physical Dielectric Strength Meets UL and cULus requirements Number of Poles 1 - 3 poles and can withstand 1500 VAC, 60Hz Termination Designed for use with straight, fork, for one minute between all flanged fork, and ring terminals. electrically isolated terminals. Termination Torque See dimensional specs page Insulation Resistance Minimum of 100 Megohms (Table 1) for tightening torque 500VDC specifications (Line and Load Overload 50 operations 600% of rated terminals) current for AC rated devices. Terminal Barrier Foldable barriers to comply with Inrush Pulse Tolerance Standard delays 12 times rated regulatory standards. current, high inrush delays 25x for Mounting Threaded Insert: 6-32 UNC-2B or cycle 60Hz M3 x 0.5-6 H B ISO (2 per Pole). Interrupt Capacity See Table A Insert Termination 7-9 in-lbs Resistance, Impedance (Across circuit breaker terminals) Torque from Line to Load Terminals Actuator Rocker with or without guard (Values Based on Series Trip Circuit Breaker) 1000 Internal Circuit Series Trip, without auxiliary switch 20 Configuration 100 Materials Housing - Glass Filled Polyester 20 Rocker Nylon 10 Line/Load Terminals Copper Alloy Bright Acid Tin Plated O 1 Weight ~170 Grams (~5.75 Ounces) per pole H M S Standard Color Housing - Black. 0.1 Rocker Several (See ordering scheme) 20 0.01 20 Environmental 0.001 0.1 1 10 100 0.01 Designed and tested in accordance with requirements of AMPERE RATING specification MIL-PRF-55629 & MIL-STD-202 as follows: CURRENT (AMPS) TOLERANCE (%) Operation Temperature -40 C to +85 C Storage Temperature -40 C to +85 C 0.10 - 5.0 +/- 15 Vibration Withstands 0.060 excursion from 5.1 - 20.0 +/- 25 10-55Hz, and 10Gs 55-500Hz, at rated current per Method 204C, Mechanical Test Condition A. Instantaneous Endurance 6,000 ON-OFF operations 6 per and ultrashort curves tested minute with rated Current and 90% of rated current. Voltage.4,000 ON-OFF operations Shock Withstands 100Gs, 6ms saw tooth with no load. while carrying rated current per Trip Free All J-Series Circuit Breakers will trip Method 213B, Test Condition I. on overload, even when actuator is Instantaneous and ultra short forcibly held in the ON position. curves tested 90% rated current. Trip Indication The operating actuator moves Moisture Resistance Method 106G, i.e., Ten 24-hour cycles positively to the OFF position when at +25C to +65C, 80-98% RH. an overload causes the breaker Salt Spray Method 101, Condition A (90-95% to trip RH 5% NaCl Solution, 96 hours) Thermal Shock Method 107G, Condition A (Five Agency Approvals cycles -55C to +25C to +85C UL489, cULus CAN/CSA 22.2 No. 5, TUV EN60947-2 to 25C) Tables Table A: Voltage and Current Rating Electrical Ratings Voltage Current Rating Short Circuit Capacity (Amps) Circuit Construction UL / cULus TUV Configuration Notes Max Rating Frequency Phase Full Load Amps without backup fuse with backup fuse without backup fuse 120/240 2 or 3 Pole Series 50 / 60 1 1.0 - 20.0 10,000 5,000 5,000 240 1 or 2 Pole 2.