Timers Delay on Operate Type DAA01, PAA01 Time range 0.1 s to 100 h Knob selection of time range Knob adjustable time setting Automatic start Repeatability: 0.2% Output: 8 A SPDT or 2 x 8 A SPDT relays For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in 22.5 Euronorm or 36 mm plug-in module housing Combined AC and DC power supply LED indication for relay status and power supply ON DAA01 PAA01 Product Description Ordering Key DAA 01 C M24 Multi-voltage delay on oper- 100 h. For mounting on DIN- Housing ate timer with 7 selectable rail (DAA01) or plug-in Function time ranges within 0.1 s and (PAA01). Type Item number Output Power supply Type Selection Mounting Output Housing Supply: 24 VDC and 24 to 240 VAC Supply: 24 to 240 VAC/DC DIN-rail 1 x SPDT D-Housing DAA01CM24 2 x SPDT DAA01DM24 Plug-in 1 x SPDT P-Housing PAA01CM24 2 x SPDT PAA01DM24 Time Specifications Output Specifications Time ranges Output 1 or 2 x SPDT relays Knob selectable 0.1 to 1 s Rated insulation voltage 250 VAC (rms) 1 to 10 s Contact Ratings (AgSnO) 2 6 to 60 s Resistive loads AC 1 8 A 250 VAC 60 to 600 s DC 12 5 A 24 VDC 0.1 to 1 h Small inductive loads AC 15 2.5 A 250 VAC 1 to 10 h DC 13 2.5 A 24 VDC 10 to 100 h 6 Mechanical life 30 x 10 operations Setting accuracy 5% 5 Electrical life 10 operations Repeatability 0.2% (at 8 A, 250 V, cos = 1) Time variation Operating frequency < 7200 operations/h Within rated power supply 0.05%/V Dielectric strength Within ambient temperature 0.2%/C Dielectric voltage 2 kVAC (rms) Reset Rated impulse withstand Power supply interruption 200 ms voltage 4 kV (1.2/50 s) Supply Specifications Power supply Overvoltage cat. III Voltage interruption 10 ms Rated operational voltage (IEC 60664, IEC 60038) Rated operational power through terminals: AC supply 4 VA (DAA01C) A1, A2 or 24 VDC 15% and DC supply 1.5 W (PAA01C) 2, 10 24 to 240 VAC + 10% -15%, 45 to 65 Hz (DAA01D) A1, A2 or 24 to 240 VAC/DC (PAA01D) 2, 10 + 10% - 15%, 45 to 65 Hz Specifications are subject to change without notice (14.03.07) 1DAA01, PAA01 General Specifications Mode of Operation The yellow LED, flashing is connected. At the end of Power ON delay 100 ms when timing, is ON as soon the set delay the relay oper- Reaction time as the relay turns ON. ates and does not release Instantaneous contact < 20 ms from power ON until the power supply is Indication for The second relay can operate interrupted for at least 200 Power supply ON LED, green as instantaneous or delayed ms. If the power supply is Output relays ON LED, yellow changeover contact. The interrupted for at least 200 (flashing when timing) selection is made by a DIP- ms before the relay operates Environment (EN 60529) switch placed under the plas- the time is set to zero and the Degree of protection IP 20 tic door on the devices front. circuit is ready for a new time Pollution degree 3 (DAA01), 2 (PAA01) period. (IEC 60664) The set delay period begins Operating temperature -20 to +60C, R.H. < 95% as soon as the power supply Storage temperature -30 to +80C, R.H. < 95% Housing Dimensions DAA01 22.5 x 80 x 99.5 mm PAA01 36 x 80 x 94 mm Weight Approx. 130 g Screw terminals (DAA01) Tightening torque Max. 0.5 Nm according to IEC EN 60947 Approvals UL, CSA RINA (DAA01 only) Time Setting CE marking Yes Centre knob: Lower knob: EMC Electromagnetic Compatibillity Time setting on relative Setting of time range Immunity According to EN 61000-6-2 scale: 1 to 10 with respect Emission According to EN 61000-6-3 to the chosen range Timer Specifications According to EN 61812-1 Operating Diagram Power supply ON T Relay 1 OFF ON Relay 2 T (Delayed) OFF ON Relay 2 (Istantaneous) OFF LED Wiring Diagrams DAA01 PAA01 L(+) L(+) m m m m 16 18 26 28 4839 A1 2 10 A2 15 25 111 DAA01C... DAA01D... PAA01C... PAA01D... DAA01D... PAA01D... N(-) N(-) 2 Specifications are subject to change without notice (14.03.07)