Timers Delay on Operate Types FAA01, FAA08 Time range 0.05 s to 300 h Knob selection of time range Knob adjustable time setting Knob selection of operating mode (4 functions): Op - delay on operate R - symmetrical recycler ON first In - interval Sh - one shot Automatic start Repeatability: 0.2% on full scale Output: 8 A DPDT relay 48 x 48 mm housing for front panel mounting 8 or 11 pin socket LED indication for relay status and power supply ON Product Description Ordering Key FAA 01 D W24 Delay on operate timer with Housing 48 x 48 mm for Housing 4 functions and selectable front panel mounting and on Function time ranges from 0.05 sec- 8-pin or 11-pin socket. Type onds to 300 hours. Item number Output Power supply Type Selection Mounting Output Plug Supply: 12 to 240 VAC/DC Front or socket DPDT 11-pin FAA01DW24 Front or socket DPDT 8-pin FAA08DW24 Time Specifications Time ranges Setting accuracy 5% on full scale 50 ms Knob selectable Repeatability 0.2% on full scale Full scale 12 0.02 to 1.2s or 200 ms 0.2 to 12s Time variation 2 to 120s Within rated power supply 0.05% /V 0.2 to 12min Within ambient temperature 0.2% /C 2 to 120min Reset 0.2 to 12h Power supply interruption >100 ms 2 to 120h Note Full scale 30 0.05 to 3s When the time knob is 0.5 to 30s below 0 the output 5 to 300s activates instantaneously 0.5 to 30min 5 to 300min 0.5 to 30h 5 to 300h Output Specifications 5 Output DPDT relay Electrical life 10 operations Rated insulation voltage 250 VAC (at 8 A, 250 V, cos = 1) Contact ratings (AgSnO) 2 Operating frequency 3600 operations/h Resistive loads AC 1 8 A 250 VAC Dielectric strength DC 12 5 A 24 VDC Dielectric voltage 2 kVAC (rms) Small inductive loads AC 15 2.5 A 250 VAC Rated impulse withstand volt. 4 kV (1.2/50 s) DC 13 2.5 A 24 VDC 6 Mechanical life 30 x 10 operations Specifications are subject to change without notice (21.03.08) 1FAA01, FAA08 Supply Specifications General Specifications Power Supply Overvoltage cat II Indication for Rated operational voltage (IEC 60947-1) Power supply On LED, green through terminals: Output ON LED, yellow (FAA01DW24) 2, 10 12 to 240 VDC + 10% - 15% (flashing when timing) 12 to 240 VAC + 10% -15%, Environment 45 to 65 Hz Degree of protection IP 50 (front panel) (FAA08DW24) 2, 7 12 to 240 VDC + 10% - 15% Operating temperature -10 to +55 C, R.H. < 85% 12 to 240 VAC + 10% -15%, Storage temperature -10 to +55 C, R.H. < 85% 45 to 65 Hz Housing Power consumption Dimensions 48 x 48 mm Rated operational power Material PA66 AC 3 VA Weight Approx. 95 g DC 1.5 W Approvals UL, CSA CE marking Yes EMC Electromagnetic Compatibillity Immunity According to EN 61000-6-2 Emission According to EN 61000-6-3 Timer specifications According to EN 61812-1 Mode of Operation Function Op Function R Function In Function Sh Delay on operate Symmetrical recycler Interval One shot The set delay period begins (ON first) The relay operates and the The time period begins as as soon as the power supply The relay operates and the time period begins as soon soon as the power supply is is connected. At the end of time period start as soon as as the power is applied. The connected and at the end of the set delay the relay oper- the power is applied. At the relay releases at the end of this period the relay operates ates and doesnt release end of the first set time peri- the time period or when the for 1s. until the power supply is od, the relay releases. At the power supply is disconnect- interrupted for at least 100 end of the second time peri- ed for at least 100 ms. ms. od (equal to the first), the relay operates again. This sequence continues with equal ON- and OFF- time periods until the power sup- ply is interrupted for at least 100 ms. Function and Time Setting Lower left knob: Lower right knob: Upper right knob: Centre knob: Setting of function Time unit selector Time range selector Time setting on absolute Op - delay on operate 0.1sec (0.1 seconds) 12 or 30 scale R - simmetrical recycler sec (seconds) In - interval 10sec (10 seconds) Sh - one shot min (minutes) 10m (10 minutes) hrs (hours) 10h (10 hours) 2 Specifications are subject to change without notice (21.03.08)