G32101111 Carlo Gavazzi

Transmitter for Analog Pt-100 DDuu linlinee Temperature Signal FieldbusFieldbus InstallationbusInstallationbus Types G 3210 1111, G 3210 1112, G 3210 1113 AnaLink transmitter for 3-wire Pt-100 input Built-in cable compensation Built-in signal linearization Temperature range: G 3210 1111: -50 to +40C (-58 to +104F) G 3210 1112: +30 to +120C (+86 to +248F) G 3210 1113: -10 to +100C (+14 to 212F) Uses only one channel Supplied by Dupline Channel coding by GAP 1605 H2-housing For mounting on DIN-rail in accordance with EN 50 022 Product Description Ordering Key G 3210 1111 AnaLink transmitter for con- ters are logged and printed Type: Dupline nection of external 3-wire Pt- out and/or read from a PC. H2 Housing 100 temperature transducer. Temperature range The module measures the The module is supplied by temperature and transmits the Dupline signal which the value to the controller G means easy installation and 3890 0030, in which the tem- flexibility for future expansion. peratures from all transmit- Type Selection Supply: Ordering no. Ordering no. Ordering no. Range: -50 to +40C Range: +30 to +120C Range: -10 to +100C By Dupline G 3210 1111 G 3210 1112 G 3210 1113 Input Specifications General Specifications Signal input 3-wire Pt-100 Channel programming By GAP 1605 Temperature range G 3210 1111: -50 to +40C Channel assignment 1 channel G 3210 1112: +30 to +120C freely programmable G 3210 1113: -10 to +100C Environment Resolution 8 bits (~0.35C/LSB) Degree of protection IP 20 (G3210 1113: (0.43C/LSB)) Pollution degree 3 (IEC 60664) Inaccuracy 0.5C (G32101113: 0.6C) Operating temperature 0 to +50C (+32 to +122F) (ambient temperature Storage temperature -50 to +85C (-58 to +185F) G 3210 111.: 25C) Humidity (non-condensing) 20 to 80% RH Temperature drift 0.02C/K ( ambient temperature Mechanical resistance G 3210 111.) Shock 15 G (11 ms) Cable length 5 m Vibration 2 G (6 to 55 Hz) Response time 256 pulse trains Dimensions (~18 s 64 ch.) Material (See Technical Information) H2-housing Weight 90 g Supply Specifications Current consumption 1.8 mA (from Dupline ) Power dissipation 10 mW Specifications are subject to change without notice (30.11.2006) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupG 3210 1111, G 3210 1112, G 3210 1113 DDuu linlinee FieldbusFieldbus InstallationbusInstallationbus Distance versus No. of Sensors Wiring Diagram S DC loop resistance () Example: Max. distance for 30 sen sors G 3210 1111: 30 x 2 mA = 60 mA 2 loop re sist ance ~ 35 . If 1.5 mm ca ble 12 /km is used, the distance is: 35 = 1.45 km max. 2 x 12 /km S: Signal wire Dupline load (mA) from AnaLink sensors Accessories Dimensions (mm) DIN-rail FMD 411 H1/H2-housing For further information refer to Accessories. 2 Specifications are subject to change without notice (30.11.2006) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group