G32101161 Carlo Gavazzi

Transmitter for Analog Current Signals DDuu linlinee Type G 3210 1161 FieldbusFieldbus InstallationbusInstallationbus AnaLink transmitter with 4 to 20 mA input 8-bit resolution Optical isolation Uses only 1 channel Channel coding by GAP 1605 Supplied by Dupline and current signal H2-housing For mounting on DIN-rail in accordance with EN 50022 Product De scrip tion Ordering Key G 3210 1161 be scaled, logged and printed Dupline Analink transmitter Type: Dupline out and/or read from a PC. with 4 to 20 mA input. Con - Type The 4 to 20 mA signal must verts the 4 to 20 mA input sig- be able to supply a volt age nal to an 8-bit binary val ue, drop of 6 V, since the analog which is trans mit ted to the part of the trans mit ter is sup- controller G 3890 0030 230. In plied by the input sig nal. this unit the an a log values can Type Selection Supply Spec i fi ca tions Supply Ordering no. Current consumption 1 channel from Dupline < 1.1 mA 4 to 20 mA Power dissipation < 10 mW By Dupline and current signal G 3210 1161 Input Spec i fi ca tions General Spec i fi ca tions Signal input 4 to 20 mA Channel programming By GAP 1605 Voltage drop 6 V Channel assignment 1 channel, Resolution 8-bit (62.5 A/LSB) freely programmable Max. current 100 mA Environment Inaccuracy Degree of protection IP 20 (entire temperature range) 1% Pollution degree 3 (IEC 60664) Cable length 25 m Operating temperature 0 to +50C (+32 to +122F) Dielectric voltage 2 kV Storage temperature -50 to +85C (-58 to +185F) Response time 256 pulse trains Humidity (non-condensing) 20 to 80% RH ( 18 s 64 channels) Mechanical resistance Shock 15 G (11 ms) Vibration 2 G (6 to 55 Hz) Dimensions Material (seeTechnical Informatio) H2-housing Weight 90 g Specifications are subject to change without notice (01.12.2006) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI GroupG 3210 1161 Du line Fieldbus Installationbus Distance Versus No. of Sensors Wiring Diagram DC loop resistance () Example: Max. distance for 100 sen sors G 3210 1161: 100 x 0.6 mA = 60 mA G 3210 1161 2 loop re sist ance ~ 35 . If 1.5 mm DUPLINE ca ble 12 /km is used, the distance is: 35 = 1.45 km max. 2 x 12 /km 1 2 34 21 23 24 22 + Dupline load (mA) from AnaLink 4-20mA sensors Dimensions (mm) Accessories DIN-rail FMD 411 H1/H2-housing For further information refer toAccessorie. 2 Specifications are subject to change without notice (01.12.2006) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group