Transmitter for Digital Signals Type G 3410 5501 8-channel monostable transmitter H4-housing For mounting on DIN-rail (EN 50022) Channel coding by GAP 1605 Dupline powered Product Descrip tion Ordering Key G 3410 5501 Dupline -powered transmit- suitable for applications in Type: Dupline H4-housing ter. Monostable function. places where no power sup- Transmitter Detects the states of 8 volt ply is available. No. of channels free contacts. Especially Input type Type Selection Supply Ordering no. 8-channel contact Powered by Dupline G 3410 5501 Supply Speci fi ca tions General Specifications Power supply Supply by Dupline Power ON delay typ. 2 s Dupline power consumption Indication for LED Not activated Min. 400 A Dupline carrier LED, yellow Max. 700 A Note: Test that yellow LED can emit light when a connec- LED Activated Min. 1.7 mA tion is made between pin Max. 3.6 mA 23 and 24 and Dupline is connected to the module. Environment Degree of protection IP 20 Input Specifications Pollution degree 3 (IEC 60664) Operating temperature -20 to +50C (-4 to +122F) Inputs 8 contacts Storage temperature -50 to +85C (-58 to +185F) Open loop voltage 5.3 to 7.6 VDC Humidity (non-condensing) 20 to 80% Short-circuit current 17 A Mechanical re sistance Operating time for signal 1 1 pulse train + 10 ms Shock 15 G (11 ms) Operating time for signal 0 1 pulse train + 110 ms Vibration 2 G (6 to 55 Hz) Contact resistance 1 k Cable length 3 m Dimensions Dielectric Voltage Material inputs - Dupline None (see Technical Information) H4-Housing Weight 250 g Specifications are subject to change without notice (20.07.2018) 1 Dupline is a registered trademark. A product of the CARLO GAVAZZI Group G 3410 5501 Mode of Operation 8-channel monostable trans- G3410 5501 trans mits on the Test that yellow LED can Input connections mitter with 8 contact inputs. channel coded for input 1. emit light, when shortcut pin Input 1: terminals 24 & 25 23 and 24, and Dupline is Input 2: terminals 24 & 26 Each input may be coded When pin 26 is activated, connected to the module. Input 3: terminals 24 & 27 individually by means of the transmission takes place on - Ter mi nals 2,4 and 24 are Input 4: terminals 24 & 28 code programmer GAP 1605. the channel coded for input 2. internal ly con nect ed. Input 5: terminals 4 & 5 For details, please refer to the - Termi nals 2,4 and 24 are Input 6: terminals 4 & 6 respective data sheet. Transmission stops in spite common ( minus). Input 7: terminals 4 & 7 of activated inputs if the Dup- Input 8: terminals 4 & 8 When pin 25 is ac ti vated, the line carrier is interrupted. LED test terminals 23 & 24 Operation Diagram Power supply Input 1 (term. 25) Transmission on chan. for input 1 Input 8 (term. 8) Transmission on channel for input 8 Wiring Diagrams Dimensions (mm) 8 channels G 3420 5501 ... Contact input H4-housing D+ D- D: signal wire Accessories For further information, see Accessories. 2 Specifications are subject to change without notice (20.07.2018) Dupline is a registered trademark. A product of the CARLO GAVAZZI Group