Combined Motion and Presence Detector for Automatic Curved and Straight Sliding Doors GUARDIAN 2 Overhead sensor for curved and straight sliding doors Motion and presence detection in one unit Digital Video Camera Technology Easy teach of presence zone Environmental adaptation No Crosstalk between sensors Separate motion and presence output 2 x SPST relay outputs Supply voltage: 12 to 24 VAC/DC LED indication for: Power, Motion and Presence CE, UL325 and TV approved Product Description Ordering Key GUARDIAN 2 The GUARDIAN 2 is an over- tion of unwanted objects. head sensor for pedestrian The presence zone is taught sliding doors. The sensor into the sensor by recogni- has combined motion and tion of standard test targets presence (safe) detection in the setup phase - it will zones. The sensor is based adapt to the shape of a on CMOS camera technolo- curved or straight sliding gy and detection on image door. The presence zone processing. The motion zone also adapts to the surround- reacts only to movement ings to work in different whereas the presence zone weather conditions. The sen- reacts to both movement sor has separate outputs for and presence. The motion the motion and presence zone can be blanked in 3 zones as well as a test input directions (front, left and to test the sensor function right) in order to avoid detec- for each door cycle. Type Selection Housing size Ordering no. 210 x 77 x 58 mm GUARDIAN 2 Specifications Rated operational voltage (U ) 12 - 24 VAC (12 - 24 VCA) Test input* Max. input current 5 mA e RMS incl. ripple 50-60 Hz, Active high: ON > 9 VAC/VDC 15% tolerance OFF < 6 VAC/VDC 12 - 24 VDC (12 - 24 VCC) Active low: ON < 6 VAC/VDC 15% tolerance OFF > 9 VAC/VDC No load supply current (I ) Typical Max. Sensitivity Adjusting in 7 steps e 192 mA 230 mA 12V AC Presence zone reaction time 146 mA 170 mA 12V DC 103 mA 120 mA 24V AC Reaction time: 210 ms (20% contrast, 65 mA 80 mA 24V DC object speed 1 m/s, test Technology Digital video camera body CA (DIN18650-1)) technology Fall time: 500 ms Power ON delay 5 seconds Motion zone reaction time Reaction time: 1,2 s (20% contrast, object Output function* speed 1 m/s, test body CA Safety and Motion Zone Relay SPST (DIN18650-1)) Common relay data: 1A DC 30VDC Fall time: 500 ms Operations minimum 600.000 0,5A, 50 VAC/ 30 VDC Operations minimum 100.000 1A, 30 VDC * UL connected to supply class 2 Specifications are subject to change without notice (01.06.2012) 1GUARDIAN 2 Specifications (cont.) Presence time Type of ESPE (Background relearn time) 7 step rotary switch Type 2 The sensing functions have In accordance with DIN18650 1 min, 5 min. to be tested for each door Not in accordance with cycle by applying a test DIN18650 10 sec, 30 sec. signal to the terminals 2+3. See test input. Vibration 10 to 150 Hz 0.5 mm/7.5g (IEC 60068-2-6) LED indications Green LED Power ON Shock 2 x 1 m and 100 x 0.5 m Yellow LED Motion detected (IEC 60068-2-32) Red LED Presence detected Ambient temperature range** For special LED functions Operating -25 to +55C (-13 to +131F) see page 3 Store -25 to +80C (-13 to +176F) Rated Insulation voltage 50 VDC Ambient light 10 lux - 50.000 lux Weight 460 g 40 lux - 50.000 lux, TV approved, measured at the Electromagnetic compatibility In acc. with EMC directive sensor surface 2004/108/EG Immunity in acc. with Contrast Min. 20% contrast between EN61326-1 and EN61326-3-1 the floor and object Marking CE Material Housing and cover ABS Black TV-Approval In acc. with machinery Front glass Clear transparent, directive 2006/42/EC, annex I polycarbonate. DIN 18650-1 5.7.4, edition 2 2005 (prEN16005), Connection cable 3 m 8 x 0,14 mm LIYY grey EN13241-1, EN 12978, Max. cable length: 10 m. edition 2003, EN61508, Environment protection IP64 (EN 60529, 60947-1) edition 2001, ENISO13849- Installation category III (IEC 60664 / 60664A / 1: 2008 cat.2 pl. c for pres- EN 60947-1) ence detection Pollution degree 3 (IEC 60664 / 60664A / UL-Approval c us UL325, CSA-C22.2 No.247 EN 60947-1) Humidity 0 % to 90 % relative, non condensing ** UL approved temperature range -25 to +40C (-13 to +104F) Specifications straight sliding door Specifications curved sliding door Motion zone sensing area (W x D) Door radius size as a Height 180 cm 246 x 204 cm function of mounting height Height 220 cm 300 x 249 cm Height 200 cm Radius 130 cm Height 300 cm 410 x 340 cm Height 250 cm Radius 170 cm The motion area can be Height 300 cm Radius 200 cm blanked from left, right and Sensor distance from curved front in 7 steps on three door (a) as a function of rotary switches curved door radius (Fig. 1) Presence zone sensing area (W x D) Radius 80 cm Distance 8.2 cm Height 180 cm 42 cm x door width Radius 90 cm Distance 10.2 cm Height 220 cm 51 cm x door width Radius 100 cm Distance 12.2 cm Height 300 cm 70 cm x door width Radius 110 cm Distance 14.3 cm Radius 120 cm Distance 16.7 cm Mounting height 1.8 m to 3.0 m Radius 130 cm Distance 18.7 cm Placement of sensor Radius 140 cm Distance 21.0 cm Horisontal distance from door max 50 cm in front of the Radius 150 cm Distance 23.4 cm door. The sensor must be Radius 160 cm Distance 25.8 cm able to see the door opening. Radius 170 cm Distance 28.3 cm Vertical distance from door 10 cm from the top of the Radius 180 cm Distance 30.8 cm door opening Radius 190 cm Distance 33.3 cm Radius 200 cm Distance 35.9 cm Mounting height 1.8 m to 3.0 m 2 Specifications are subject to change without notice (01.06.2012)