Proximity Sensors Inductive Rectangular Plastic Housings Types IC, Cable Plastic housing Sensing distance: 4 mm Non-flush mounting Output: Transistor, NPN/PNP, normally open Power supply: 10 to 30 VDC 2 m PVC cable Product Description Ordering Key IC 17 CNC 04 NO-K Inductive proximity sensor in figured as PNP or NPN, nor- Ind. prox. switch rectangular plast housing. mally open. Connection with Housing style This series is suitable for the 2 m PVC cable. Housing size control of axial and rotation- Housing material al movements. Output con- Housing length Detection principle Sensing distance Output type Output configuration Type Selection Rated op. dist. Connection Housing Ordering no. Ordering no. (Sn) dimensions mm Transistor, NPN Transistor, PNP Normally open Normally open 4 mm Cable 17.5 x 17 x 28.5 IC 17 CNC 04 NO-K IC 17 CNC 04 PO-K Specifications Rated operational volt. (U ) 10 to 30 VDC (ripple included) Sensing distance 4 mm B Ripple 10% Effective operating dist. (S ) 0.9 x S S 1.1 x S r n r n Rated operational current (I ) Usable operating dist. (S ) 0.85 x S S 1.15 x S e u r u r Continuous 100 mA 25C Ambient temperature No-load supply current (I ) 12 mA (ON) Operating -25 to +70C (-13 to +158F) o Storage -30 to +75C (-22 to +167F) Voltage drop (U ) < 1 V ( I d max Degree of protection IP 67 (Nema 1, 3, 4, 6, 13) Frequency of op. cycles (f) 500 Hz Housing material Plastic Indication for output ON LED, yellow CE-marking Yes Connection Cable, 2 m, PVC, AWG 26 Specifications are subject to change without notice (18.05.10) 1IC, Cable Wiring Diagrams Dimensions LED 2 x 3,3 + 1 BN + 1 BN 17,5 10 4 BK 25,5 4 BK 28,5 3 BU 3 BU - - 17 NPN - Normally open PNP - Normally open Installation Hints To avoid interference from inductive voltage/ Relief of cable strain Protection of the sensing face Switch mounted on mobile carrier current peaks, separate the prox. switch pow- er cables from any other power cables, e.g. motor, contactor or solenoid cables Incorrect Correct The cable should not be pulled A proximity switch should not serve as Any repetitive flexing of the mechanical stop cable should be avoided 2 Specifications are subject to change without notice (18.05.10)