Photoelectrics Retro-reflective for Transparent Objects Type PD30CNG02....RT Miniature sensor range Range: 2 m, with reflector Sensitivity adjustment by Teach-In programming Modulated, red light 617 nm Supply voltage: 10 to 30 VDC Output: 100 mA, NPN or PNP preset Make and break switching function programmable LED indication for output, stability and power ON Protection: reverse polarity, short circuit and transients Cable and plug versions Excellent EMC performance Remote teach features Product Description Ordering Key PD30CNG02PPM5RT The PD30CNG02 sensor The Teach-In function for Type family comes in a compact adjustment of the sensitivi- Housing style 10 x 30 x 20 mm reinforced ty makes the sensors highly Housing size PMMA/ABS housing. flexible. The output type is Housing material The sensors are useful in preset (NPN or PNP), and the Housing length applications where detection output switching function is Detection principle of transparent objects are programmable (NO or NC). Sensing distance needed. A remote teach feature allow Output type Compact housing and high the sensor to be set up from Output configuration power LED for excellent per- e.g. a PLC. Connection type formance-size ratio. Remote teach Type Selection Housing Range Connection Ordering no. Ordering no. W x H x D S NPN PNP n Make or break switching Make or break switching 10 x 30 x 20 mm 2 m Cable PD 30 CNG 02 NPRT PD 30 CNG 02 PPRT 10 x 30 x 20 mm 2 m Plug PD 30 CNG 02 NPM5RT PD 30 CNG 02 PPM5RT Note: Reflectors to be ordered separately Specifications EN 60947-5-2 Rated operating distance (S ) Up to 2 m, with reflector Light source inGaAlP, LED, 617 nm n 80 mm (ER4) Light type, not polarized Red, modulated Sensing angle 2 Detection reliability 20% attenuation Ambient light 10,000 lux Blind zone 10 mm Light spot 110 mm 1.5 m Sensitivity Adjustable by Teach-In Operating frequency 1000 Hz Temperature drift 0.1%/C Response time Teach settings are valid for OFF-ON (t ) 0.5 ms ON teach temperature 20C ON-OFF (t ) 0.5 ms OFF Hysteresis (H) Power ON delay (t ) 300 ms v (differential travel) 10% Output function Rated operational volt. (U ) 10 to 30 VDC B NPN and PNP Preset (ripple included) NO/NC switching function Set up by button Ripple (U ) 10% rpp Remote teach function Output current Teach on (push button active) 0 to 2.5 VDC (NPN) Continuous (I ) 100 mA e 5 to 30 VDC (PNP) Short-time (I) 100 mA Tamper proof When activated more than (max. load capacity 100 nF) 20 sec. the sensor goes into No load supply current (I ) 30 mA 24 VDC o a Tamper proof mode. Minimum operational current (I ) 0.5 mA m Indication OFF-state current (I ) 100 A r Output ON LED, yellow Signal stability ON and power ON LED, green Voltage drop (U ) 2.4 VDC 100 mA d Protection Short-circuit, reverse polarity and transients Specifications are subject to change without notice (11.07.2016) 1 PD30CNG02....RT Specifications (cont.) EN 60947-5-2 Environment Rated insulation voltage 500 VAC (rms) Installation category III (IEC 60664/60664A Housing material 60947-1) Body ABS Pollution degree 3 (IEC 60664/60664A Front material PMMA, red 60947-1) Connection Degree of protection IP 67 (IEC 60529 60947-1) Cable PVC, black, 2 m 2 Ambient temperature 4 x 0.14 mm , = 3.3 mm Operating -25 to +55C (-13 to +131F) Plug M8, 4-pin (CON, 54-series) Storage -40 to +70C (-40 to +158F) Weight With cable: 40 g Vibration 1 0 to 55 Hz, 0.5 mm/7.5 g With plug: 10 g (IEC 60068-2-6) CE-marking Yes Shock 30 g / 11ms, 3 pos, 3 neg Approvals cULus (UL508) per axis (IEC 60068-2-6, 60068-2-32) Operation Diagram tv = Power ON delay ON Power supply OFF Present Object Not Present Tv ON Make Output (N.O.) OFF Tv ON Break Output (N.C.) OFF Wiring Diagrams NPN PNP 1 BN V 1 BN V 4 BK 2 WH Remote teach 2 WH 4 BK Remote teach 3 BU 3 BU V (GND) V (GND) Remote teach input Remote teach input active when connected active when connected to GND to V+ Detection Diagram Excess Gain 150 100 100 50 0 10 0 500 1000 1500 2000 2500 3000 -50 -100 1 10 100 1000 10000 -150 Distance (mm) Distance mm 2 Specifications are subject to change without notice (11.07.2016) Width mm Excess Gain