Timers Multifunction Types DMC01, PMC01 Time range 0.1 s to 100 h 7 knob selectable functions Op - Delay on operate, manual start Oa - Delay on operate, automatic and manual start In - Interval, manual start Ia - Interval, automatic and manual start Nr - Interval with no time reset, manual start Na - Interval with no time reset, automatic and manual start Dr - Delay on release Knob selection of time range Knob adjustable time setting External adjustable time setting available DMC01C DMC01D PMC01 Repeatability: 0.2% DC supply for PNP/NPN and Namur sensors Output: 8 A SPDT or 2 x 8 A SPDT relay For mounting on DIN-rail in accordance with DIN/EN 50 022 or Plug-in 22.5 mm or 45 mm Euronorm or 36 mm Plug-in module housing LED indication for relay status and power supply ON Product Description Ordering key DMC 01 C B23 Multi-voltage timer with 7 15 VDC, 10 mA (1 relay) or 24 Housing knob selectable functions VDC, 15 mA (2 relays) supply Function and 7 knob selectable time for PNP/NPN sensors and 8.2 Type ranges within 0.1s and VDC supply for Namur sensor. Item number 100h. Remote time setting For mounting on DIN-rail Output available. (DMC01) or Plug-in (PMC01). Power Supply Type Selection Mounting Output Housing Supply: 24 VDC Supply: 24 or 48 VAC Supply: 115 or 230 VAC For DIN-rail 1 x SPDT D - 22.5 mm DMC 01 C 724 DMC 01 C B48 DMC 01 C B23 For DIN-rail 2 x SPDT D - 45 mm DMC 01 D 724 DMC 01 D B48 DMC 01 D B23 Mounting Output Housing Supply: 24 VDC Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC Plug-in 1 x SPDT P - Housing PMC 01 C 724 PMC 01 C 024 PMC 01 C 115 PMC 01 C 230 Plug-in 2 x SPDT P - Housing PMC 01 D 724 PMC 01 D 024 PMC 01 D 115 PMC 01 D 230 Time Specifications Time ranges Reset Knob selectable 0.1 to 1 s Manual reset of time 1 to 10 s and/or relay Close the trigger contact 6 to 60 s Pulse duration 10 ms 60 to 600 s Power supply interruption 0.1 to 1 h 1 relay versions: 700 ms 1 to 10 h 2 relays versions: 200 ms 10 to 100 h PNP/NPN sensor supply output Setting accuracy 5% 1 relay versions: 15 VDC, 10 mA 2 relays versions: 24 VDC, 15 mA Repeatability 0.2% pins + and - or 6 and 7 Time variation pin + or 6 positive Within rated power supply 0.05%/V Namur sensor connection 8.2 VDC, 1k Within ambient temperature 0.2%/C pins + and S or 6 and 5 External time setting pin + or 6 positive Linear remote potentiometer 10 k Max length of pot. cable 3 m Specifications are subject to change without notice (18.06.07) 1DMC01, PMC01 Output Specifications General Specifications Output 1 or 2 x SPDT relay Power ON delay 100 ms Rated insulation voltage 250 VAC (RMS) Reaction time from trigger Delayed contact(s) < 10 ms Contact Ratings (AgSnO) 2 Instantaneous contcat < 20 ms Resistive loads AC 1 8 A 250 VAC DC 12 5 A 24 VDC Indication for Small inductive loads AC 15 2.5 A 250 VAC Power supply ON LED, green DC 13 2.5 A 24 VDC Output relays ON LED, yellow (flashing when 6 timing) Mechanical life 30 x 10 operations 5 Environment (EN 60529) Electrical life 10 operations Degree of protection IP 20 (at 8 A, 250 V, cos = 1) Pollution degree 3 (DMC01), 2 (PMC01) Operating frequency < 7200 operations / h (IEC 60664) Dielectric strength Operating temperature -20 to 60 C, R.H. < 95% Dielectric voltage 2 kVAC (RMS) Storage temperature -30 to 80 C, R.H. < 95% Rated impulse withstand volt. 4 kV (1.2/50 s) Housing Dimensions DMC01C 22.5 x 80 x 99.5 mm DMC01D 45 x 80 x 99.5 mm Supply Specifications PMC01 36 x 80 x 94 mm Power supply Overvoltage cat. III Weight 120 to 260g depending on Rated operational voltage (IEC 60664, IEC 60038) model through terminals: Screw terminals (DMC01) A1, A2 or A1, A3 (DMC01) Tightening torque Max 0.5 Nm according to B48 24 or 48 VAC 15% IEC EN 60947 45 to 65 Hz Approval UL, CSA B23 115 or 230 VAC 15% CE Marking Yes 45 to 65 Hz 724 24 VDC 20% EMC Electromagnetic Compatibility 2, 10 (PMC01) Immunity According to EN 61000-6-2 024 24 VAC 15%,45 to 65 Hz Emission According to EN 61000-6-3 115 115 VAC 15%,45 to 65 Hz Timer Specifications According to EN 61812-1 230 230 VAC 15%,45 to 65 Hz 724 24 VDC 20% Voltage interruption 10 ms Rated operational power AC supply: 5 VA DC supply: 2 W Function/Range/Time Setting Adjust the function setting To access the DIP switches In - Interval, manual start scale: 1 to 10 with respect the DIP switches 1 to 6 as open the grey plastic cover Ia-Interval, automatic to the chosen range. shown below (1 to 4 for using a screwdriver as and manual start Lower knob: DMC01Cxxx). shown below. Nr - Interval with no time Setting of time range reset, manual start Note 1: DIP switch 5 must Upper knob: Na -Interval with no time External potentiometer be kept ONwhen using Selection of function: reset, automatic and (DMC01D, PMC01C): PMC01Dxxx. Op -Delay on operate, manual start Time setting on relative manual start Note 2: DIP switch 6 does Dr - Delay on release scale: 1 to 10 with respect Oa-Delay on operate, not have any effect on the to the chosen range. automatic and manual Centre knob: PMC01Cxxx working mode. start Time setting on relative Sensor type selection DMC01D, ON ON OFF OFF: PNP/NPN sensor, PMC01C, Open collector PMC01D DMC01C or contact OFF OFF ON ON: Namur sensor Time setting (DMC01D and PMC01C) ON: Centre knob on front OFF: External trimmer Second relay ON: Instantaneous OFF: DPDT 2 Specifications are subject to change without notice (18.06.07)