Timers
Multifunction
Types DMC01, PMC01
Time range 0.1 s to 100 h
7 knob selectable functions
Op - Delay on operate, manual start
Oa - Delay on operate, automatic and manual start
In - Interval, manual start
Ia - Interval, automatic and manual start
Nr - Interval with no time reset, manual start
Na - Interval with no time reset, automatic and
manual start
Dr - Delay on release
Knob selection of time range
Knob adjustable time setting
External adjustable time setting available
DMC01C DMC01D PMC01
Repeatability: 0.2%
DC supply for PNP/NPN and Namur sensors
Output: 8 A SPDT or 2 x 8 A SPDT relay
For mounting on DIN-rail in accordance with DIN/EN
50 022 or Plug-in
22.5 mm or 45 mm Euronorm or 36 mm Plug-in
module housing
LED indication for relay status and power supply ON
Product Description Ordering key
DMC 01 C B23
Multi-voltage timer with 7 15 VDC, 10 mA (1 relay) or 24 Housing
knob selectable functions VDC, 15 mA (2 relays) supply Function
and 7 knob selectable time for PNP/NPN sensors and 8.2 Type
ranges within 0.1s and VDC supply for Namur sensor. Item number
100h. Remote time setting For mounting on DIN-rail Output
available. (DMC01) or Plug-in (PMC01). Power Supply
Type Selection
Mounting Output Housing Supply: 24 VDC Supply: 24 or 48 VAC Supply: 115 or 230 VAC
For DIN-rail 1 x SPDT D - 22.5 mm DMC 01 C 724 DMC 01 C B48 DMC 01 C B23
For DIN-rail 2 x SPDT D - 45 mm DMC 01 D 724 DMC 01 D B48 DMC 01 D B23
Mounting Output Housing Supply: 24 VDC Supply: 24 VAC Supply: 115 VAC Supply: 230 VAC
Plug-in 1 x SPDT P - Housing PMC 01 C 724 PMC 01 C 024 PMC 01 C 115 PMC 01 C 230
Plug-in 2 x SPDT P - Housing PMC 01 D 724 PMC 01 D 024 PMC 01 D 115 PMC 01 D 230
Time Specifications
Time ranges Reset
Knob selectable 0.1 to 1 s Manual reset of time
1 to 10 s and/or relay Close the trigger contact
6 to 60 s Pulse duration 10 ms
60 to 600 s Power supply interruption
0.1 to 1 h 1 relay versions: 700 ms
1 to 10 h 2 relays versions: 200 ms
10 to 100 h
PNP/NPN sensor supply output
Setting accuracy 5% 1 relay versions: 15 VDC, 10 mA
2 relays versions: 24 VDC, 15 mA
Repeatability 0.2%
pins + and - or 6 and 7
Time variation
pin + or 6 positive
Within rated power supply 0.05%/V
Namur sensor connection 8.2 VDC, 1k
Within ambient temperature 0.2%/C
pins + and S or 6 and 5
External time setting
pin + or 6 positive
Linear remote potentiometer 10 k
Max length of pot. cable 3 m
Specifications are subject to change without notice (18.06.07) 1DMC01, PMC01
Output Specifications General Specifications
Output 1 or 2 x SPDT relay Power ON delay 100 ms
Rated insulation voltage 250 VAC (RMS) Reaction time from trigger
Delayed contact(s) < 10 ms
Contact Ratings (AgSnO)
2
Instantaneous contcat < 20 ms
Resistive loads AC 1 8 A @ 250 VAC
DC 12 5 A @ 24 VDC Indication for
Small inductive loads AC 15 2.5 A @ 250 VAC Power supply ON LED, green
DC 13 2.5 A @ 24 VDC Output relays ON LED, yellow (flashing when
6 timing)
Mechanical life 30 x 10 operations
5 Environment (EN 60529)
Electrical life 10 operations
Degree of protection IP 20
(at 8 A, 250 V, cos = 1)
Pollution degree 3 (DMC01), 2 (PMC01)
Operating frequency < 7200 operations / h
(IEC 60664)
Dielectric strength
Operating temperature -20 to 60 C, R.H. < 95%
Dielectric voltage 2 kVAC (RMS)
Storage temperature -30 to 80 C, R.H. < 95%
Rated impulse withstand volt. 4 kV (1.2/50 s)
Housing
Dimensions DMC01C 22.5 x 80 x 99.5 mm
DMC01D 45 x 80 x 99.5 mm
Supply Specifications
PMC01 36 x 80 x 94 mm
Power supply Overvoltage cat. III Weight 120 to 260g depending on
Rated operational voltage (IEC 60664, IEC 60038) model
through terminals:
Screw terminals (DMC01)
A1, A2 or A1, A3 (DMC01)
Tightening torque Max 0.5 Nm according to
B48 24 or 48 VAC 15%
IEC EN 60947
45 to 65 Hz
Approval UL, CSA
B23 115 or 230 VAC 15%
CE Marking Yes
45 to 65 Hz
724 24 VDC 20%
EMC Electromagnetic Compatibility
2, 10 (PMC01)
Immunity According to EN 61000-6-2
024 24 VAC 15%,45 to 65 Hz
Emission According to EN 61000-6-3
115 115 VAC 15%,45 to 65 Hz
Timer Specifications According to EN 61812-1
230 230 VAC 15%,45 to 65 Hz
724 24 VDC 20%
Voltage interruption 10 ms
Rated operational power
AC supply: 5 VA
DC supply: 2 W
Function/Range/Time Setting
Adjust the function setting To access the DIP switches In - Interval, manual start scale: 1 to 10 with respect
the DIP switches 1 to 6 as open the grey plastic cover Ia-Interval, automatic to the chosen range.
shown below (1 to 4 for using a screwdriver as and manual start
Lower knob:
DMC01Cxxx). shown below. Nr - Interval with no time
Setting of time range
reset, manual start
Note 1: DIP switch 5 must Upper knob:
Na -Interval with no time External potentiometer
be kept ONwhen using Selection of function:
reset, automatic and (DMC01D, PMC01C):
PMC01Dxxx. Op -Delay on operate,
manual start Time setting on relative
manual start
Note 2: DIP switch 6 does
Dr - Delay on release scale: 1 to 10 with respect
Oa-Delay on operate,
not have any effect on the
to the chosen range.
automatic and manual Centre knob:
PMC01Cxxx working mode.
start Time setting on relative
Sensor type selection
DMC01D,
ON ON OFF OFF: PNP/NPN sensor,
PMC01C,
Open collector
PMC01D
DMC01C
or contact
OFF OFF ON ON: Namur sensor
Time setting (DMC01D and PMC01C)
ON: Centre knob on front
OFF: External trimmer
Second relay
ON: Instantaneous
OFF: DPDT
2 Specifications are subject to change without notice (18.06.07)