CG2164X3 CEL

RF SWITCH CG2164X3 Dual-Band Wireless DPDT RF Switch Enter a Short Document/Title Name Here DESCRIPTION PACKAGE The CG2164X3 is a GaAs MMIC DPDT (Double 6-pin TSON Package Pole Double Throw) switch for 2.5 GHz and 6 GHz (1.5mm x 1.5mm x 0.37mm) dual-band wireless LAN applications FEATURES Control Voltage: VC(H) = 1.8 to 5.0 V (3.0V TYP.) VC(L) = -0.2 to 0.2 V (0V TYP.) Low Insertion Loss: L = 0.50 dB TYP. @ f = 2.5 GHz ins L = 0.60 dB TYP. @ f = 6.0 GHz ins High Isolation: ISL = 23 dB TYP. @ f = 2.5 GHz APPLICATIONS ISL = 15 dB TYP. @ f = 6.0 GHz Dual-band wireless LAN Power Handling: (IEEE802.11a/b/g/n/ac) P (0.5dB) = +32 dBm TYP. @ f = 2.5 GHz, in VC(H) = 3.0 V, VC(L) = 0 V P (0.5dB) = +30 dBm TYP. @ f = 6.0 GHz, in VC(H) = 3.0 V, VC(L) = 0 V ORDERING INFORMATION Part Number Order Number Package Marking Description CG2164X3 CG2164X3-C2 6-pin plastic C0N Embossed tape 8 mm wide TSON Pin 1, 6 face the perforation side (Pb-Free) of the tape MOQ 10 kpcs/reel CG2164X3-EVAL CG2164X3-EVAL Evaluation Board with DC block capacitors, power supply bypass capacitors, and RF and DC connectors MOQ 1 1 This document is subject to change without notice. Date Published: October 2017 CDS-0033-06 (Issue E) C0N CG2164X3 PIN CONFIGURATION AND INTERNAL BLOCK DIAGRAM Pin No. Pin Name (Top View) (Top View) (Bottom View) 1 ANT2 6 1 6 1 2 VC2 1 6 3 RX 5 5 2 2 5 2 4 TX 4 3 4 4 3 3 5 VC1 6 ANT1 Remark Exposed pad : GND TRUTH TABLE VC1 VC2 ANT1-TX ANT1-RX ANT2-TX ANT2-RX High Low OFF ON ON OFF Low High ON OFF OFF ON ABSOLUTE MAXIMUM RATINGS (TA = +25C, unless otherwise specified) Parameter Symbol Rating Unit Note 1 Control Voltage VC 6.0 V Note 2 Input Power P 1 +33 dBm in Note 3 P 2 +26 dBm in Operating Ambient Temperature T -45~+85 C A Storage Temperature T -55~+150 C stg Note 1. |VC1 - VC2| 6.0V 2. 3.0V |VC1 VC2| 5.0V f 0.5GHz 3. 3.0V |VC1 VC2| 5.0V f 0.05GHz RECOMMENDED OPERATING RANGE (TA = +25C, unless otherwise specified) Parameter Symbol MIN. TYP. MAX. Unit 0.05 - 6.0 GHz Operating Frequency f Switch Control Voltage (H) VC(H) +1.8 +3.0 +5.0 V Switch Control Voltage (L) VC(L) -0.2 0 +0.2 V 2 This document is subject to change without notice.