MASWSS0130 GaAs Broadband DPDT Diversity Switch Rev. V5 0.5 - 3.0 GHz Functional Schematic Features Ideal for 802.11 b/g Applications Broadband Performance: 0.5 - 3.0 GHz Low Insertion Loss: 0.6 dB 2.4 GHz Pin 1 High Isolation: 25 dB 2.4 GHz Fast Switching Speed: 0.5 m GaAs PHEMT Process GNGNGNGNDDDD GNGNGNGNDDDD High P1dB: 34 dBm 3 V Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper GNGNGNGNDDDD GNGNGNGNDDDD Halogen-Free Green Mold Compound RoHS* Compliant and 260C Reflow Compatible VVc1c1 VVc2c2 Description M/A-COMs MASWSS0130 is a broadband GaAs PHEMT MMIC DPDT diversity switch in a low cost, lead-free 3 mm 12-lead PQFN plastic package. The MASWSS0130 is ideally suited for applications where very small size and low cost are required. Pin Configuration Typical applications are for WLAN IEEE 802.11b/g systems that employ two antennas for transmit and PIN No. PIN Name Description receive diversity. Designed for high power, this 1 GND Ground DPDT switch is optimized for high linearity at 2.4 GHz. 2 GND Ground 3 V 1 Control 1 C The MASWSS0130 is fabricated using a 0.5 micron 4 ANT1 Antenna Port 1 gate length GaAs PHEMT process. The process features full passivation for performance and 5 GND Ground reliability. 6 ANT2 Antenna Port 2 7 V 2 Control 2 C 1 Ordering Information 8 GND Ground 9 GND Ground Part Number Package 10 Rx Receive Port MASWSS0130 Bulk Packaging 11 GND Ground MASWSS0130TR 7 inch, 1000 piece reel 12 Tx Transmit Port MASWSS0130TR-3000 13 inch, 3000 piece reel Sample Test Board MASWSS0130SMB (Includes 5 Samples) 1. Reference Application Note M513 for reel size information. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 11 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MASWSS0130 GaAs Broadband DPDT Diversity Switch Rev. V5 0.5 - 3.0 GHz 2,3 Electrical Specifications: T = 25C, Z = 50 , V = 0 V/3 V, 8 pF Capacitor A 0 C Parameter Test Conditions Units Min. Typ. Max. 3 Insertion Loss 2.4 GHz dB 0.6 0.9 Isolation 2.4 GHz dB 20 25 (on/off or off/on) Return Loss 2.4 GHz dB 23 Two Tone, +15 dBm per tone, 5 MHz Spacing, IP2 dBm 2.4 GHz 94 Two Tone, +15 dBm per tone, 5 MHz Spacing, IIP3 2.4 GHz dBm 55 Input P1dB 2.4 GHz dBm 34 Input P0.1dB 2.4 GHz dBm 30 nd 2 Harmonic 2.4 GHz, P = 20 dBm dBm -80 IN rd 3 Harmonic 2.4 GHz, P = 20 dBm dBm -95 IN 10% to 90% RF nS 34 Trise, Tfall 90% to 10% RF nS 35 50% control to 90% RF 48 Ton, Toff nS 50% control to 10% RF 54 Transients mV 7 Control Current Vc = 3 V A 5 25 2. External DC blocking capacitors are required on all RF ports. 3. Insertion loss can be optimized by varying the DC blocking capacitor value. 4,5 Qualification Absolute Maximum Ratings Qualified to M/A-COM specification REL-201, Parameter Absolute Maximum Process Flow 2. Input Power 3 V Control +35 dBm Input Power 5 V Control +35 dBm Handling Procedures Operating Voltage +8.5 volts Please observe the following precautions to avoid damage: Operating Temperature -40 C to +85 C Storage Temperature -65 C to +150 C Static Sensitivity 4. Exceeding any one or combination of these limits may cause permanent damage to this device. Gallium Arsenide Integrated Circuits are sensitive 5. M/A-COM does not recommend sustained operation near to electrostatic discharge (ESD) and can be these survivability limits. damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 22 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: