MAAL-010705-001SMB MACOM

MAAL-010705 Low Noise Amplifier Rev. V2 0.5 - 1.6 GHz Functional Block Diagram Features Low Noise Figure Excellent Input Return Loss Single Voltage Bias 3 V 1 N/C 8 N/C Integrated Active Bias Circuit Current Adjustable 20 - 80 mA with an RF RF IN OUT External Resistor High Linearity, OIP3 >32 dBm RF GND Small Package: 2 mm PDFN-8LD N/C BIAS RoHS* Compliant FB V BIAS Description The MAAL-010705 is a high dynamic range single stage MMIC LNA with excellent linearity and low noise figure designed for operation from 0.5 to 1.6 Pin Configuration GHz. The LNA is packaged in an RoHS compliant leadless 2 mm 8-lead PDFN package. Pin No. Pin Name Description This MMIC has an integrated active bias circuit 1 N/C No Connection allowing direct connection to 3 V voltage supply and 2 RF RF Input IN minimizing variation over temperature and process. The bias current and gain can be set with external 3 RF GND RF Ground resistors to allow the user to customize the current and gain value to fit the application. 4 V Bias Voltage BIAS 5 FB Feedback The MAAL-010705 offers less than 0.7 dB noise figure, more than 32 dBm OIP3 and 20 dB input 6 N/C No Connection return loss. The excellent input match, low noise figure and high OIP3 along with the flexibility of 7 RF RF Output OUT setting current and gain make this LNA ideal for 3G 8 N/C No Connection and 4G cellular infrastructure applications. For optimum performance above 1.6 GHz the MAAL -010706 is recommended. The MAAL-010705 and MAAL-010706 share the package type and footprint. 1,2 Ordering Information Part Number Package MAAL-010705-TR3000 tape and reel MAAL-010705-001SMB evaluation board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. * Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 11 1 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: MAAL-010705 Low Noise Amplifier Rev. V2 0.5 - 1.6 GHz 3 Electrical Specifications : Freq = 0.9 GHz, V = 4 V, T = +25C, Z = 50 D A 0 Parameter Test Conditions Units Min. Typ. Max. Gain dB 18 21 Output IP3 P = 5 dBm, Tone Spacing = 1 MHz dBm 32 OUT Output P1dB dBm 17.5 18.5 Input Return Loss dB 19 Output Return Loss dB 18 Noise Figure dB 0.50 Total Current I = I +I mA 60 70 DQ D BIAS 3. V and V are connected together to +4 V, R3 = 150 and R4 = 240 , reference recommended schematic on page 8. D BIAS 4,5 Handling Procedures Absolute Maximum Ratings Please observe the following precautions to avoid Parameter Rating damage: Supply Voltage 5.5 V Static Sensitivity Current 100 mA Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged Power Dissipation 600 mW by static electricity. Proper ESD control techniques should be used when handling these class 1A RF Input Power 20 dBm devices. Storage Temperature -55C to +150C Operating Temperature -40C to +85C 6 Junction Temperature +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Typical thermal resistance ( jc) = 45C/W. 22 2 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: