Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Functional Schematic Features Linear Gain: 20 dB Saturated Output Power: 39 dBm Pulsed 50 Input / Output Match Lead-Free 5 mm 20-lead PQFN Package 20 18 17 16 19 RoHS* Compliant GND 1 15 GND Applications Point-to-Point Radios 2 14 GND GND C-Band Radar 3 13 RF RF IN OUT Description GND 4 12 GND The MAAP-011027 is a 2-stage, 8 W saturated C-band power amplifier in a 5 mm 20 lead PQFN 5 11 GND GND package, allowing for easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or 10 6 7 8 9 as a driver stage in high power pulsed applications. Each device is 100% RF tested to ensure performance compliance. 2 Pin Configuration 1,2,4,5,11, Ground 13 RF OUT 12,14,15, 1 Ordering Information 3 RF 16,17 V 2a IN D 6 V 1b 18 V 1a Part Number Package G D 7 V 2b 19 V 2a MAAP-011027-TR0500 500 piece reel G G 8 V 1b 20 V 1a MAAP-011027-TR1000 1000 piece reel D G 3 MAAP-011027-000SMB Sample Board 9,10 V 2b 21 Paddle D 2. MACOM recommends connecting unused package pins to 1. Reference Application Note M513 for reel size information. ground. 3. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, compliant to current RoHS EU directive. 111 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: Power Amplifier, 8 W 5.2 - 5.9 GHz MAAP-011027 Rev. V4 Electrical Specifications: Freq. 5.2 - 5.9 GHz, V = 9 V Pulsed, 100 s Pulse Width,10% Duty Cycle , Z = 50 DD 0 Gain dB 17 20 Input Return Loss dB 10 Output Return Loss dB 10 P dBm 37 39 SAT Pulse Period s 100 Pulse Duty Cycle % 10 Efficiency % 37 Small Signal Current A 1 4,5,6 Maximum Operating Ratings Handling Procedures Please observe the following precautions to avoid damage: Input Power 28 dBm Static Sensitivity Supply Voltage 11 V Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged 7 Junction Temperature +150 C by static electricity. Proper ESD control techniques should be used when handling these class 1A Operating Temperature -40C to +85C devices. Storage Temperature -55C to +150C 4. Exceeding any one or combination of these limits may cause permanent damage to this device. 5. MACOM does not recommend sustained operation near these survivability limits. 6. Operating at nominal conditions with T +150C will ensure J 6 MTTF > 1 x 10 hours. 7. Junction Temperature (T ) = T + * (V * I) J C JC Typical CW thermal resistance ( ) = 7.7C/W JC 222 MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: