A Business Partner of Renesas Electronics Corporation. Preliminary Data Sheet PS9531, PS9531L1, R08DS0114EJ0100 Rev.1.00 PS9531L2, PS9531L3 Nov 29, 2013 2.5 A OUTPUT CURRENT, HIGH CMR, IGBT GATE DRIVE, 8-PIN DIP PHOTOCOUPLER DESCRIPTION The PS9531, PS9531L1, PS9531L2 and PS9531L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode, a signal processing circuit and a power output transistor on the output side on one chip. The PS9531 Series is designed specifically for high common mode transient immunity (CMR), high output current and high switching speed. The PS9531 Series is suitable for driving IGBTs and MOS FETs. The PS9531 Series is in a plastic DIP (Dual In-line Package). The PS9531L1 is lead bending type for long creepage distance. The PS9531L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9531L3 is lead bending type (Gull-wing) for surface mounting. FEATURES Long creepage distance (8 mm MIN.: PS9531L1, PS9531L2) PIN CONNECTION (Top View) Large peak output current (2.5 A MAX., 2.0 A MIN.) High speed switching (t , t = 175 ns MAX.) PLH PHL 876 5 1. NC UVLO (Under Voltage Lock Out) protection with hysteresis 2. Anode 3. Cathode High common mode transient immunity (CM , CM = 50 kV/s MIN.) H L 4. NC Embossed tape product : PS9531L2-E3: 1 000 pcs/reel 5. VEE 6. VO : PS9531L3-E3: 1 000 pcs/reel 7. NC <R> Pb-Free product 8. VCC 1 2 3 4 Safety standards UL approved: No. E72422 CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) SEMKO approved (EN 60065, EN 60950) DIN EN 60747-5-5 (VDE 0884-5) approved (Option) APPLICATIONS IGBT, Power MOS FET Gate Driver Industrial inverter IH (Induction Heating) The mark <R> shows major revised points. The revised points can be easily searched by copying an<R in the PDF file and specifying it in theFind what field. R08DS0114EJ0100 Rev.1.00 Page 1 of 20 Nov 29, 2013 SHIELDA Business Partner of Renesas Electronics Corporation. PS9531, PS9531L1, PS9531L2, PS9531L3 Chapter Title PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9531 +0.5 9.25 0.25 7.62 +0.4 1.01 0.2 +0.5 6.5 0.1 0 to 15 2.54 0.50.15 0.25 M 0.840.15 Lead Bending Type (Gull-wing) For Surface Mount PS9531L3 +0.5 9.25 0.25 85 1 4 9.650.4 +0.4 +0.5 1.01 6.5 0.2 0.1 2.54 0.50.15 0.740.25 0.25 M R08DS0114EJ0100 Rev.1.00 Page 2 of 20 Nov 29, 2013 2.8 MIN. 4.150.3 3.50.2 3.50.2 0.6350.15