CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Upgrade Super low ESR, high temperature resistance Large capacitance & Improved high ripple current capability Rated voltage range : 2.5 to 25Vdc (20/25V newly added) 2000 hours at 105C Suitable for DC-DC converters, voltage regulators and decoupling applications For computer motherboards SPECIFICATIONS Items Characteristics Category -55 to +105C Temperature Range Rated Voltage Range 2.5 to 25Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltageB1.15V (at 105C) Leakage Current I=0.2CV (max.) *Note Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) (at 20C after 2 minutes) Dissipation Factor 0.12 max. (tane) (at 20C, 120Hz) Low Temperature Max. impedance ratio at 100kHz to the 20C value Characteristics Z(-25C)/Z(+20C) 1.15 Z(-55C)/Z(+20C) 1.25 Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 105C. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 500 hours. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Surge Voltage Test The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Failure Rate 1% per 1000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. DIMENSIONS mm MARKING Coated Case EX) 4V820MF 18M PS 820 V fD 8 10 4 L 11.5 12.5 F 3.5 5.0 L+1.5 max. 15min. 4min. (1/2) CAT. No. E1001D FD+0.5max. F0.6 FP0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Upgrade PART NUMBERING SYSTEM 4 PS 820 M J12 -T14 Lead configuration code Case code (H11 : 8B11.5, J12 : 10B12.5) Design change number Capacitance Code 270MF 270 Capacitance tolerance (P20%) Nominal capacitance code 560MF 560 820MF 820 Series name Rated voltage code Rated voltage Code 2.5V 2R5 Lead configuration code 4V 4 T14: Ammo pack for F10(F=5.0) 6.3V 6 10V 10 T15: Ammo pack for F8(F=3.5) 16V 16 E5 : Cut lead (Lead length C=3.5P0.5mm) 20V 20 *Regarding to taping specifications and cut/formed lead, please consult us. 25V 25 STANDARD RATINGS Nominal ESR Ripple current Case size Rated voltage Capacitance (momax./20c, (mArms max./ Part Number fDBL(mm) (Vdc) (mF) 100k to 300kHz) 105c,100kHz) 2.5 680 10 5,230 2R5PS680MH11 4 560 10 5,230 4PS560MH11 6.3 390 12 4,770 6PS390MH11 8b11.5 10 270 14 4,420 10PS270MH11 16 180 16 4,360 16PS180MH11 20 100 24 3,320 20PS100MH11 25 68 24 3,320 25PS68MH11 2.5 1,500 8 5,500 2R5PS1500MJ12 4 820 8 5,500 4PS820MJ12 6.3 680 10 5,500 6PS680MJ12 10b12.5 10 470 12 5,300 10PS470MJ12 16 330 14 5,050 16PS330MJ12 20 150 20 4,320 20PS150MJ12 25 100 20 4,320 25PS100MJ12 (2/2) CAT. No. E1001D