CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PMASeries The new construction provides a low profile and high CV. Super low ESR, impedance, and high heat resistance characteristics have been secured by using highly conductive polymer electrolytic materials. Compatible with digitalization and high frequencies of electrical equipment with superior noise absorption. Excellent ESR characteristics, high ripple current, 5,000 hours at 105C. Low-profile product lineup Outer coating: Flame-retardant epoxy resin UL94 V-0 or equivalent Non-solvent resistant type RoHS2 Compliant Halogen free products This product cant be used for applications related to human life (such as in-vehicle equipment). SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 16 to 25Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current Shall not exceed values shown in STANDARD RATINGS. *Note (at 20 after 2 minutes) Dissipation Factor (tan ) 0.12 max. (at 20, 120Hz) Low Temperature Z(-25)/Z(+20)1.15 Characteristics Z(-55)/Z(+20)1.25 (Max. Impedance Ratio) (at 100kHz) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 5,000 hours at 105. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value ESR 200% of the initial specied value Leakage current The initial specied value Damp Heat The following specications shall be satised when the capacitors are restored to 20 after exposing them for 500 hours at 60, (Steady State) 90 to 95% RH without voltage applied. Appearance No signicant damage Capacitance change -20 to +40% of the initial value D.F. (tan ) 200% of the initial specied value ESR 200% of the initial specied value Leakage current The initial specied value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specied at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 16 20 25 Surge voltage (Vdc) 18 23 29 Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 200% of the initial specied value ESR 200% of the initial specied value Leakage current The initial specied value Soldering Heat The following specications shall be satised when the solder temperature is reduced back to 20C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Voltage treatment Failure Rate 0.5% per 1,000 hours maximum (Condence level 60% at 105 ) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. MARKING DIMENSIONS mm P EX25V22F B A358 E220 2 * Rated voltage symbol P C Rated voltage Vdc 16 20 25 Symbol C D E *2 : The dimension P (the distance between terminals) shall be the shortest distance between the land and grounding surface. Capacitance symbol Size code A B C L W P Capacitance code ex. 22 F220 F30 7.00.1 7.00.1 7.20.2 3.0 max. 1.20.2 3.500.2 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U L W ACONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PMASeries PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PMA A RA M F 3 0 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 22F:220, 39F:390) Taping code Terminal code Voltage code (ex. 20V:200, 25V:250) Series code Category Please refer toProduct code guide (conductive polymer type STANDARD RATINGS WV Cap Size Leakage current ESR Rated ripple current Part No. (Vdc) (F) code (A max./after 2min.) (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz) 56 F30 448 40 2,200 APMA160ARA560MF30S 16 68 F30 544 50 2,000 APMA160ARA680MF30S 39 F30 390 45 2,100 APMA200ARA390MF30S 20 47 F30 470 50 2,000 APMA200ARA470MF30S 22 F30 275 50 2,000 APMA250ARA220MF30S 25 33 F30 412 50 2,000 APMA250ARA330MF30S RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency(Hz) 120 1k 10k 50k 100k to 500k SMD type 0.05 0.30 0.55 0.70 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001U