CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Up grade Super low ESR, high temperature resistance and high ripple current capability Rated voltage range : 2.5 to 16Vdc 2,000 hours at 105C Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards RoHS Compliant SPECIFICATIONS Items Characteristics Category -55 to +105C Temperature Range Rated Voltage Range 2.5 to 16Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltage(V)B1.15 (at 105C) Leakage Current I=0.2CV (max.) *Note Where, I : Leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) (at 20C after 2 minutes) Dissipation Factor 0.08 max. (tane) (at 20C, 120Hz) Low Temperature Max. impedance ratio at 100kHz to the 20C value Characteristics Z(-25C)/Z(+20C) 1.15 Z(-55C)/Z(+20C) 1.25 Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 2,000 hours at 105C. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change P20% of the initial measured value D.F. (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Failure Rate 1% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105 . C DIMENSIONS mm MARKING Terminal Code : E EX) 4V560MF Coated Case 292 A 560 V 4 fD 6.3 8 10 fd 0.5 0.8 L L+0.3max L+1.5max L 15min. 4min. F 2.5 3.5 5 (1/2) CAT. No. E1001E FD+0.5max. Fd FP0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead Up grade PART NUMBERING SYSTEM 132645178910 11213 14 15 16 17 18 A P S A A A A E A A A A A M A A A S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 270MF:271,1000MF:102) Lead formingTaping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category Please refer toA guide to global code (conductive polymer type STANDARD RATINGS Case size ESR Rated ripple current WV(Vdc) Cap(mF) Part No. fDbL(mm) (momax/20c, 100k to 300kHz) (mArms/105c, 100kHz) 390 6.3B10.5 20 3,160 APSA2R5ESS391MFA5G 680 8B11.5 7 5,580 APSA2R5ESS681MHB5S 2.5 820 8B11.5 7 5,580 APSA2R5ESS821MHB5S 1,000 10B11.5 6 5,860 APSA2R5ESS102MJB5S 270 6.3B10.5 20 3,160 APSA4R0ESS271MFA5G 390 6.3B10.5 24 3,300 APSA4R0ESS391MFA5G 4 560 8B11.5 7 5,580 APSA4R0ESS561MHB5S 820 10B11.5 6 5,860 APSA4R0ESS821MJB5S 220 6.3B10.5 20 3,160 APSA6R3ESS221MFA5G 330 6.3B10.5 28 3,190 APSA6R3ESS331MFA5G 6.3 390 8B11.5 8 5,080 APSA6R3ESS391MHB5S 680 10B11.5 7 5,860 APSA6R3ESS681MJB5S 47 6.3B10.5 25 2,820 APSA100ESS470MFA5G 68 6.3B10.5 25 2,820 APSA100ESS680MFA5G 100 6.3B10.5 25 2,820 APSA100ESS101MFA5G 10 150 6.3B10.5 25 2,820 APSA100ESS151MFA5G 270 8B11.5 9 4,710 APSA100ESS271MHB5S 470 10B11.5 8 5,650 APSA100ESS471MJB5S 16 100 6.3B10.5 25 2,820 APSA160ESS101MFA5G SS : Lead forming code and taping code (2/2) CAT. No. E1001E