CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
TM
PSC P52
NPCAP -PSASeries
Low profile
Super low ESR, high temperature resistance and high ripple current capability
Lower ESR
Rated voltage range : 2.5 to 16Vdc
PSA
Endurance : 15,000 hours at 105
Suitable for DC-DC converters, voltage regulators and decoupling applications
Lower ESR
for computer motherboards
PS P56
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS Compliant
Halogen Free
SPECIFICATIONS
Items Characteristics
Category
-55 to +105
Temperature Range
Rated Voltage Range 2.5 to 16Vdc
Capacitance Tolerance 20% (M) (at 20, 120Hz)
Surge Voltage Rated voltage1.15 (at 105)
Leakage Current
I=0.2CV
*Note
Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) (at 20 after 2 minutes)
Dissipation Factor
0.08 max. (FA5 size : 0.12max.)
(at 20 , 120Hz)
(tan )
Low Temperature
Z(-25)/Z(+20)1.15
Characteristics
Z(-55)/Z(+20)1.25
(at 100kHz)
(Max. Impedance Ratio)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours
at 105.
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current The initial specified value
Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current The initial specified value
Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds
through a protective resistor (R=1k ) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current The initial specified value
Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105 )
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105.
DIMENSIONS [mm] MARKING
EX) 4V560F
Terminal Code : E
Coated Case
292
A
560
V
4
(FA5) (HB5, JB5)
Size code FA5 HB5 JB5
L' 15min. 4min.
D 6.3 8.0 10.0
0.5 0.8
d
F 2.5 3.5 5.0
D' D+0.5max
L' L+0.3max L+1.5max
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
54 CAT. No. E1001O
D'
d
F0.5
F0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
TM
NPCAP -PSASeries
PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A PSA AAA E AA AAA M AAA S
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 270F:271, 1 000F:102)
Lead formingTaping code
Terminal code
Voltage code (ex. 4V:4R0, 6.3V:6R3, 10V:100)
Series code
Category
Please refer toProduct code guide (conductive polymer type
STANDARD RATINGS
WV Cap Case size ESR Rated ripple current
Part No.
(Vdc) (F) D L(mm) (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz)
390 6.3 10.5 20 3,160 APSA2R5E 391MFA5S
680 8 11.5 7 5,580 APSA2R5E 681MHB5S
2.5 820 8 11.5 7 5,580 APSA2R5E821MHB5S
1,000 10 11.5 6 5,860 APSA2R5E102MJB5S
1,500 10 11.5 7 5,860 APSA2R5E152MJB5S
270 6.3 10.5 20 3,160 APSA4R0E271MFA5S
390 6.3 10.5 24 3,300 APSA4R0E391MFA5S
4
560 8 11.5 7 5,580 APSA4R0E561MHB5S
820 10 11.5 6 5,860 APSA4R0E821MJB5S
220 6.3 10.5 20 3,160 APSA6R3E221MFA5S
330 6.3 10.5 28 3,190 APSA6R3E331MFA5S
6.3 390 8 11.5 8 5,080 APSA6R3E391MHB5S
470 8 11.5 7 5,700 APSA6R3E 471MHB5S
680 10 11.5 7 5,860 APSA6R3E 681MJB5S
47 6.3 10.5 25 2,820 APSA100E 470MFA5S
68 6.3 10.5 25 2,820 APSA100E680MFA5S
100 6.3 10.5 25 2,820 APSA100E101MFA5S
10
150 6.3 10.5 25 2,820 APSA100E151MFA5S
270 8 11.5 9 4,710 APSA100E271MHB5S
470 10 11.5 8 5,650 APSA100E471MJB5S
16 100 6.3 10.5 25 2,820 APSA160E101MFA5S
: Enter the appropriate lead forming or taping code.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
55 CAT. No. E1001O