CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
TM
NPCAP -PSCSeries
Super low ESR, high ripple current capability
Lower profile than PSA ( 88L to 1012.5L)
Rated voltage range : 2.5 to 16Vdc
PSC
Nominal capacitance range : 270 to 2,700F
Endurance : 15,000 hours at 105
Low profile
Suitable for DC-DC converters, voltage regulators and decoupling applications
Lower ESR
for computer motherboards
PSA P54
Added 2.5V 820F (ESR 5m max.)
Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
RoHS Compliant
Halogen Free
SPECIFICATIONS
Items Characteristics
Category
-55 to +105
Temperature Range
Rated Voltage Range
2.5 to 16Vdc
Capacitance Tolerance
20% (M) (at 20, 120Hz)
Surge Voltage
Rated voltage1.15 (at 105)
Leakage Current I=0.2CV or 500A, whichever is greater.
*Note
Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (Vdc) (at 20 after 2 minutes)
Dissipation Factor
0.10 max.
(tan ) (at 20, 120Hz)
Low Temperature
Z(-25)/Z(+20)1.15
Characteristics
Z(-55)/Z(+20)1.25
(Max.Impedance Ratio) (at 100kHz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours
at 105 .
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current
The initial specified value
Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20 after subjecting them to DC voltage at 60 ,
90 to 95% RH for 1,000 hours.
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current The initial specified value
Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 for 30 seconds
through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds.
Appearance No significant damage
Capacitance change 20% of the initial value
D.F. (tan) 150% of the initial specified value
ESR 150% of the initial specified value
Leakage current The initial specified value
Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105 )
*Note : If any doubt arises, measure the leakage current after the following voltage treatment.
Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105.
DIMENSIONS [mm]
MARKING
Terminal Code : E
EX) 2.5V820F
Coated Case
3D6
C
Size code H08 HB5 JB5 JC5
820
V
D 8.0 8.0 10.0 10.0
2.5
d 0.6 0.8(Note1) 0.8(Note1) 0.6
F 3.5 3.5 5.0 5.0
D'
D+0.5max.
L' L+1.0max. L+1.5max.
L' 15min. 4min.
Note1 : 0.6 for rated volt 16V.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
52 CAT. No. E1001O
D'
d
F0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS
Radial Lead
TM
NPCAP -PSCSeries
PART NUMBERING SYSTEM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
A PSC AAA E AA AAA M AAA S
Supplement code (Note2)
(Note2) PSC series, 2.5V820F(ESR 5m max.)
Size code
has supplement code.
Capacitance tolerance code
Can case, terminal and terminal plating are
Capacitance code (ex. 330F:331, 1000F:102)
the same as all others in PSC series.
Lead formingTaping code
Terminal code
Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100)
Series code
Category
Please refer toProduct code guide (conductive polymer type
STANDARD RATINGS
WV Cap Case size ESR Rated ripple current
Part No.
(Vdc) (F) D L(mm) (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz)
560 8 8 7 6,100 APSC2R5E561MH08S
820 8 8 5 6,100 APSC2R5E821MH08J
820 8 8 7 6,100 APSC2R5E821MH08S
2.5 1,000 8 8 7 6,100 APSC2R5E102MH08S
1,000 8 11.5 7 6,100 APSC2R5E102MHB5S
1,500 8 11.5 7 6,100 APSC2R5E 152MHB5S
2,700 10 11.5 8 5,560 APSC2R5E 272MJB5S
560 8 8 7 6,100 APSC4R0E 561MH08S
4 680 8 11.5 7 6,100 APSC4R0E681MHB5S
1,000 10 11.5 6 6,640 APSC4R0E102MJB5S
470 8 8 8 5,700 APSC6R3E471MH08S
560 8 8 8 5,700 APSC6R3E561MH08S
6.3
820 10 11.5 7 6,640 APSC6R3E821MJB5S
1,500 10 11.5 10 5,560 APSC6R3E152MJB5S
390 8 11.5 9 5,650 APSC100E391MHB5S
10
680 10 11.5 7 6,100 APSC100E681MJB5S
270 8 11.5 11 5,080 APSC160E271MHB5S
330 10 11.5 10 6,100 APSC160E331MJB5S
16
330 10 12.5 10 6,100 APSC160E 331MJC5S
470 10 11.5 10 6,100 APSC160E 471MJB5S
: Enter the appropriate lead forming or taping code.
Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications.
53 CAT. No. E1001O