CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead TM NPCAP -PSCSeries Super low ESR, high ripple current capability PSK Rated voltage range : 2.5 to 16Vdc Nominal capacitance range : 270 to 2,700F Longer life Endurance : 15,000 hours at 105 Downsizing Suitable for DC-DC converters, voltage regulators and decoupling applications PSF PSE PSC for computer motherboards Longer ESR Longer life Added 2.5V 820F (ESR 5m max.) Longer life Solvent resistant type (see PRECAUTIONS AND GUIDELINES) Downsizing RoHS2 Compliant PSG Halogen Free SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 2.5 to 16Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.2CV or 500A, whichever is greater. *Note Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V ) (at 20 after 2 minutes) dc Dissipation Factor 0.10 max. (tan ) (at 20, 120Hz) Low Temperature Z(-25)/Z(+20)1.15 Characteristics Z(-55)/Z(+20)1.25 (at 100kHz) (Max.Impedance Ratio) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 15,000 hours at 105. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Bias Humidity Test The following specications shall be satised when the capacitors are restored to 20 after subjecting them to DC voltage at 60 , 90 to 95% RH for 1,000 hours. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specied at 105 for 30 seconds through a protective resistor(R=1k) and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 2.5 4.0 6.3 10 16 Surge voltage (Vdc) 2.9 4.6 7.2 12 18 Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Failure Rate 0.5% per 1,000 hours maximum (Condence level 60% at 105 ) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS mm MARKING Terminal Code : E EX) 2.5V820F Coated Case 3D6 C Size code H08 HB5 JB5 JC5 820 V D 8.0 8.0 10.0 10.0 2.5 d 0.6 0.8(Note1) 0.8(Note1) 0.6 F 3.5 3.5 5.0 5.0 D D+0.5max. L L+1.0max. L+1.5max. L 15min. 4min. Note1 : 0.6 for rated volt 16V. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001V 2021 D d F0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead TM NPCAP -PSCSeries PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PSC AAA E AA AAA M AAA S Supplement code (Note2) (Note2) PSC series, 2.5V820F(ESR 5m max.) Size code has supplement code. Capacitance tolerance code Can case, terminal and terminal plating are Capacitance code (ex. 330F:331, 1000F:102) the same as all others in PSC series. Lead formingTaping code Terminal code Voltage code (ex. 4V:4R0,6.3V:6R3,10V:100) Series code Category Please refer toProduct code guide (conductive polymer type STANDARD RATINGS WV Cap Case size ESR Rated ripple current Part No. (Vdc) (F) D L(mm) (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz) 560 88 7 6,100 APSC2R5E561MH08S 820 88 5 6,100 APSC2R5E821MH08J 820 88 7 6,100 APSC2R5E821MH08S 2.5 1,000 88 7 6,100 APSC2R5E102MH08S 1,000 811.5 7 6,100 APSC2R5E102MHB5S 1,500 8 11.5 7 6,100 APSC2R5E 152MHB5S 2,700 10 11.5 8 5,560 APSC2R5E 272MJB5S 560 8 8 7 6,100 APSC4R0E 561MH08S 4 680 811.5 7 6,100 APSC4R0E681MHB5S 1,000 1011.5 6 6,640 APSC4R0E102MJB5S 470 88 8 5,700 APSC6R3E471MH08S 560 88 8 5,700 APSC6R3E561MH08S 6.3 820 1011.5 7 6,640 APSC6R3E821MJB5S 1,500 1011.5 10 5,560 APSC6R3E152MJB5S 390 811.5 9 5,650 APSC100E391MHB5S 10 680 1011.5 7 6,100 APSC100E681MJB5S 270 811.5 11 5,080 APSC160E271MHB5S 330 1011.5 10 6,100 APSC160E331MJB5S 16 330 10 12.5 10 6,100 APSC160E 331MJC5S 470 10 11.5 10 6,100 APSC160E 471MJB5S : Enter the appropriate lead forming or taping code. RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency Hz 120 1k 10k 50k 100k to 500k Radial lead type 0.10 0.35 0.60 0.80 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001V 2021