CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New Super low ESR, high ripple current capability PSK Downsized from PSE series (F6.3B8L to F5B8L) Longer life (5,000 hours at 105C) Downsized ESR after endurance is speci ed within the initial spec PSE RoHS Compliant Halogen Free SPECIFICATIONS Items Characteristics Category -55 to +105C Temperature Range Rated Voltage Range 2.5Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltage(V)B1.15 (at 105C) *Note Leakage Current 500MA max. (at 20C after 2 minutes) Dissipation Factor 0.10 max. (tane) (at 20C, 120Hz) Low Temperature Z(-25C)/Z(+20C) 1.15 Characteristics Z(-55C)/Z(+20C) 1.25 (Max.Impedance Ratio) (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 5,000 hours at 105C. Appearance No significant damage Capacitance change P20% of the initial value D.F. (tanE) The initial specified value ESR The initial specified value Leakage current The initial specified value Bias Humidity Test The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to DC voltage at 60C, 90 to 95% RH for 1,000 hours. Appearance No significant damage Capacitance change P20% of the initial value D.F. (tanE) The initial specified value ESR The initial specified value Leakage current The initial specified value Surge Voltage Test The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change P20% of the initial value D.F. (tanE) The initial specified value ESR The initial specified value Leakage current The initial specified value Failure Rate 0.5% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105C. DIMENSIONS mm Terminal Code : E Coated Case Size code E08 MARKING fD 5.0 EX) 2.5V560MF fd 0.45 F 2.0 K 6D6 fD FD+0.5max. 560 (E08) L L+1.0max. V 2.5 L 15min. 4min. (1/2) CAT. No. E1001K FD Fd FP0.5CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Radial Lead New PART NUMBERING SYSTEM 132645178910 11213 14 15 16 17 18 A P S K 2 R 5 E A A 5 6 1 M E 0 8 S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 560MF:561) Lead formingTaping code Terminal code Voltage code Series code Category Please refer toProduct code guide (conductive polymer type STANDARD RATINGS Case size ESR Rated ripple current WV(Vdc) Cap(mF) Part No. fDbL(mm) (mo max./20c, 100k to 300kHz) (mArms/105c, 100kHz) 220 5B8 7 4,350 APSK2R5ESS221ME08S 330 5B8 7 4,350 APSK2R5ESS331ME08S 2.5 470 5B8 7 4,350 APSK2R5ESS471ME08S 560 5B8 7 4,350 APSK2R5ESS561ME08S : Enter the appropriate lead forming or taping code. SS (2/2) CAT. No. E1001K