CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte. (ESR and rated ripple current values are improved from PXA series.) Rated voltage range : 2.5 to 16Vdc, Capacitance range : 27 to 470MF Case size range : F5B5.7L to F8B6.7L Suitable for DC-DC converters, voltage regulators and decoupling applications used to computer motherboards etc. RoHS Compliant SPECIFICATIONS Items Characteristics Category -55 to +105C Temperature Range Rated Voltage Range 2.5 to 16Vdc Capacitance Tolerance P20% (M) (at 20C, 120Hz) Surge Voltage Rated voltage(V)B1.15 (at 105C) Leakage Current I=0.2CV (max.) I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc) (at 20C after 2 minutes) Dissipation Factor 0.12 max. (tane) (at 20C, 120Hz) Low Temperature Z(-25C)/Z(+20C) 1.15 Characteristics (Max. Impedance Ratio) Z(-55C)/Z(+20C) 1.25 (at 100kHz) Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage is applied for 1,000 hours at 105C. Appearance No significant damage Capacitance change P20% of the initial value DF (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Bias Humidity The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them to the DC rated voltage at 60C, 90 to 95% RH for 500 hours. Appearance No significant damage Capacitance change P20% of the initial value DF (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105C for 30 seconds through a protective resistor(R=1kO) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change P20% of the initial value DF (tanE) 150% of the initial specified value ESR 150% of the initial specified value Leakage current The initial specified value Failure Rate 1% per 1,000 hours maximum (Confidence level 60% at 105C) *Note : If any doubt arises, measure the leakage current after following voltage treatment. Voltage treatment : DC rated voltage are applied to the capacitors for 120 minutes at 105C. DIMENSIONS mm MARKING Terminal Code : A EX) 4V220MF W C28M 220 Size code fD L A B C W P V 4 E60 5 5.7 5.3 5.3 5.9 0.5 to 0.8 1.4 F60 6.3 5.7 6.6 6.6 7.2 0.5 to 0.8 1.9 H70 8 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1 0.3max. AP0.2 LP0.3 PART NUMBERING SYSTEM 132645178910 11213 14 15 16 17 18 A P X C A A A A R A A A A M A A A G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 27MF:270,100MF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer toA guide to global code (conductive polymer type (1/2) CAT. No. E1001F FDP0.5 BP0.2 P CP0.2CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount STANDARD RATINGS Rated ripple current ESR(momax/20c) WV(Vdc) Cap(mF) Size code (mArms/100k to 300kHz) Part No. 100kHz 300kHz(Ref. value) -55 to +105c 180 E60 30 22 2,000 APXC2R5ARA181ME60G 2.5 270 F60 20 18 2,700 APXC2R5ARA271MF60G 470 H70 17 16 3,420 APXC2R5ARA471MH70G 150 E60 30 22 2,000 APXC4R0ARA151ME60G 4 220 F60 21 19 2,640 APXC4R0ARA221MF60G 330 H70 18 17 3,300 APXC4R0ARA331MH70G 100 E60 35 26 1,780 APXC6R3ARA101ME60G 6.3 180 F60 22 19 2,580 APXC6R3ARA181MF60G 220 H70 18 17 3,300 APXC6R3ARA221MH70G 56 E60 40 31 1,660 APXC100ARA560ME60G 10 82 F60 23 21 2,400 APXC100ARA820MF60G 150 H70 20 19 3,160 APXC100ARA151MH70G 27 E60 45 35 1,570 APXC160ARA270ME60G 16 39 F60 25 23 2,300 APXC160ARA390MF60G 82 H70 25 23 2,830 APXC160ARA820MH70G (2/2) CAT. No. E1001F