CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PXSSeries Super low ESR, high ripple current capability Longer life (20,000 hours at 105) Rated voltage range : 4 to 16Vdc, Capacitance range : 39 to 560F Suitable for DC-DC converters, voltage regulators and decoupling applications for computer motherboards etc. Solvent resistant type (see PRECAUTIONS AND GUIDELINES) RoHS2 Compliant Halogen Free SPECIFICATIONS Items Characteristics Category -55 to +105 Temperature Range Rated Voltage Range 4 to 16Vdc Capacitance Tolerance 20% (M) (at 20, 120Hz) Leakage Current I=0.2CV *Note Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V dc) (at 20 after 2 minutes) Dissipation Factor 0.12 max. (tan ) (at 20, 120Hz) Low Temperature Z(-25)/Z(+20)1.15 Characteristics Z(-55 )/Z(+20 ) 1.25 (at 100kHz) (Max. Impedance Ratio) Endurance The following specications shall be satised when the capacitors are restored to 20 after the rated voltage is applied for 20,000 hours at 105. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Bias Humidity The following specications shall be satised when the capacitors are restored to 20 after subjecting them to the DC rated voltage at 60, 90 to 95% RH for 1,000 hours. Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Surge Voltage The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specied at 105 for 30 seconds through a protective resistor(R=1k)and discharge for 5 minutes 30 seconds. Rated voltage (Vdc) 4.0 6.3 10 16 Surge voltage (Vdc) 4.6 7.2 12 18 Appearance No signicant damage Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value ESR 150% of the initial specied value Leakage current The initial specied value Soldering Heat The following specications shall be satised when the solder temperature is reduced back to 20C to measure dip resistance after soldering has been performed under the recommended soldering conditions. Appearance No signicant damage Capacitance value Within the specied tolerance range D.F. (tan) The initial specied value ESR The initial specied value Leakage current The initial specied value (Voltage treatment) Failure Rate 0.5% per 1,000 hours maximum (Condence level 60% at 105) *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105. DIMENSIONS mm MARKING EX) 6.3V390F Terminal Code : A W S69A 390 Size Code D L A B C W P V 6.3 F61 6.3 5.8 6.6 6.6 7.2 0.5 to 0.8 1.9 H70 8.0 6.7 8.3 8.3 9.0 0.7 to 1.1 3.1 0.3max. A0.2 L0.3 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001V 2021 D0.5 B0.2 P C0.2CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS Surface Mount TM NPCAP -PXSSeries PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 A PXS A RA M G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 39F:390, 150F:151) Taping code Terminal code Voltage code (ex. 6.3V:6R3, 10V:100) Series code Category Please refer toProduct code guide (conductive polymer type STANDARD RATINGS WV Cap Size ESR Rated ripple current Part No. (Vdc) (F) code (m max./20 , 100k to 300kHz) (mArms/105 , 100kHz) 4 560 H70 22 3,220 APXS4R0ARA561MH70G 120 F61 22 2,570 APXS6R3ARA121MF61G 6.3 220 F61 22 2,570 APXS6R3ARA221MF61G 390 H70 22 3,220 APXS6R3ARA391MH70G 120 F61 27 2,320 APXS100ARA121MF61G 10 150 H70 30 2,760 APXS100ARA151MH70G 39 F61 37 2,050 APXS160ARA390MF61G 68 F61 30 2,200 APXS160ARA680MF61G 16 82 H70 30 2,760 APXS160ARA820MH70G 120 H70 27 2,900 APXS160ARA121MH70G RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency Hz 120 1k 10k 50k 100k to 500k SMD type 0.05 0.30 0.55 0.70 1.00 Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. CAT. No. E1001V 2021