MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS High reliability, Low impedance, 105C
LXZ
Lower Z
Downsized
@Adoption of innovative electrolyte and new technologies
@Endurance with ripple current : 2,000 to 8,000 hours at 105C
LXY
@Solvent resistant type (see PRECAUTIONS AND GUIDELINES)
Lower Z
@RoHS Compliant
LXV
?SPECIFICATIONS
Items Characteristics
Category
-55 to +105C
Temperature Range
Rated Voltage Range 10 to 63Vdc
Capacitance Tolerance P20% (M) (at 20C, 120Hz)
Leakage Current I=0.01CV or 3MA, whichever is greater.
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (V) (at 20C after 2 minutes)
Dissipation Factor Rated voltage (Vdc) 10V 16V 25V 35V 50V 63V
(tane)
tanE (Max.) 0.19 0.16 0.14 0.12 0.10 0.10
When nominal capacitance exceeds 1,000MF, add 0.02 to the value above for each 1,000MF increase. (at 20C, 120Hz)
Low Temperature 10Vdc to 50Vdc : 3max.
Z(-55C)/Z(+20C)
Characteristics
63Vdc : 6max.
(Max. Impedance Ratio)
(at 120Hz)
Endurance The following specifications shall be satisfied when the capacitors are restored to 20C after subjected to DC voltage with the rated
ripple current is applied for the specified period of time at 105C.
Time F5 & 6.3 : 2,000hours F8 : 3,000hours F10 : 5,000hours F12.5 : 7,000hours F16 & 18 : 8,000hours
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
Shelf Life The following specifications shall be satisfied when the capacitors are restored to 20C after exposing them for 1,000 hours at 105C without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change [P20% of the initial value
D.F. (tanE) [200% of the initial specified value
Leakage current [The initial specified value
?DIMENSIONS [mm]
@Terminal Code : E
Sleeve (PET : Dark blue)
fD 5 6.3 8 10 12.5 16
fd 0.5 0.5 0.6 0.6 0.6 0.8
5.0 7.5
F 2.0 2.5 3.5 5.0
fD' FD+0.5max.
L' 15min. 4min. L' L+1.5max.
(F5 to F10) (F12.5 to F16)
Gas escape end seal
Vent
(Except F5 & F6.3)
?PART NUMBERING SYSTEM
132645178910 11213 14 15 16 17 18
E L X Y A A A E A A A A A M A A A N
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 120MF:121, 2,200MF:222)
Lead formingtaping code
Terminal code
Voltage code (ex. 10V:100, 25V:250, 63V:630)
Series code
Category
Please refer toProduct code guide (radial lead type
?RATED RIPPLE CURRENT MULTI PLI ERS
@Frequency Mul ti pli ers
Frequency (Hz)
120 1k 10k 100k The endurance of capacitors is reduced with internal heating produced by ripple
Capacitance (mF)
10 to 180 0.40 0.75 0.90 1.00 current at the rate of halving the lifetime with every 5C rise.
220 to 560 0.50 0.85 0.94 1.00 When long life performance is required in actual use, the rms ripple current has to
680 to 1,800
0.60 0.87 0.95 1.00 be reduced.
2,200 to 3,900
0.75 0.90 0.95 1.00
4,700 to 8,200
0.85 0.95 0.98 1.00
(1/2) CAT. No. E1001K
FD'
Fd
FP0.5
FP0.5