TM COVENTRY Clean Room Products Division of ITW Chemtronics TDS 48042F 2.5 mm Fiber Optic Foam Swab PRODUCT DESCRIPTION TM COMPATIBILITY Coventry Sealed Foam Swabs are Foam heads are compatible with most common constructed from reticulated 100 pores per solvents such as light aliphatics, isopropyl alcohol, inch medical grade polyurethane foam which and methanol. Not recommended for use with features the best open cell structure, providing ketones such as acetone or methyl ethyl ketone. excellent particle entrapment characteristics. The foam is thermally bonded to the swab Polypropylene handles are compatible with all handle without using adhesives. These swabs common solvents including organic solvents and are economical and ideal for general most acids. applications. They are characterized by the Specifically designed for use with Electro- following features: Wash PX, Electro-Wash MX and Electro- Traps surface particles while cleaning Wash CZ. For detailed instructions, on the High solvent capacity holds solvent well Combination Cleaning Process Refer to Fiberless construction does not generate FO-Chem-6. loose fibers or particles No adhesives or binders are used in the AVAILABILITY construction Economical for high quantity applications TM 48040 2.75 (6.8 cm) Polypropylene Available Aqua-Prime processed Handle 0 .41 (10.5 mm) Foam Sized to fit 2.5mm fiber optic connectors Head, Flexible Paddle Tip Soft polyurethane foam will not scratch 500 swabs/bag surfaces 5 bags/case Swab head gently conforms to surface 48042F* 2.75 (6.8 cm) Polypropylene TYPICAL APPLICATIONS Handle 0 .14 (3.56 mm) Foam Remove particulate and oily contaminants Head, Flexible Paddle Tip from 2.5mm fiber optic connector end faces 50 swabs/tube Especially effective as end face cleaner 18 tubes/case in back plane applications when used in the TM CCP Combination Cleaning Process with TM Electro-Wash PX solvent and the QbE wiper To clean excess adhesives after gluing Precision application of lubricants and MANUFACTURED BY: solvents ITW Chemtronics 2.5mm alignment sleeve cleaning 8125 Cobb Center Drive Kennesaw, GA 30152 USA Micro mechanical cleaning 1-770-424-4888 REV. (06/07) Remove flux residue from printed circuit boards Good for general purpose cleaning TECHNICAL HOT LINE 1-800-TECH-401 Sealed Foam Swabs Test Data Swabs: 48040 48042F (EFB-10) Swab Head Material 100ppi urethane open-cell (zap) foam Head Diameter 0.10 (2.5 mm) Handle Length 2.75 (7.0 cm) Particle Counts: 797 0.5 1.0 m 230 1.0 2.0 m 66 2.0 5.0 m 5.0 10.0 m 24 11 10.0 25.0 m 2 over 25.0 m TOTAL 1,130 NVR (g/swab) none detected Chlorides (g/swab) none detected The swabs were tested by Particle Measurement Technology. All tests were done using the recommended practices of the Institute of Environmental Science, Swabs and Wipes Working Group. RELATED PRODUCTS 25183 Swab for 2.5mm Connector Cleaning 25125F Swab for 1.25mm Connector Cleaning 38542F Swab for Ferrule and Fusion Splice V-Groove 51125F Fusion Splice Mirror Cleaning Swab QbE Fiber Optic Cleaning System ES7100 Electro-Wash CZ Aerosol ES810 Electro-Wash PX Aerosol ES1621 Electro-Wash MX Aerosol FW2150 Electro-Wash MX Pen CFK1000 Fiber Optic Cleaning Kit DISTRIBUTED BY: TECHNICAL ASSISTANCE ITW Chemtronics provides A technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401 TM TM Chemtronics is a registered trademark of ITW Chemtronics. All rights reserved. Coventry and Aqua-Prime are trademarks of ITW Chemtronics. All rights reserved. TECHNICAL HOT LINE 1-800-TECH-401