CHEMTRONICS TDS CC505F Technical Data Sheet MTP Connector Cleaning Swabs PRODUCT DESCRIPTION COMPATIBILITY Chemtronics MTP Connector Cleaning Chemtronics MTP Connector Cleaning Swabs are the cleaning tool specifically Swabs are compatible with most for cleaning MTP connections. They common solvents such as isopropyl feature an exclusive chamois material alcohol and methanol. Not engineered to quickly and safely clean recommended for use with ketones such MTP connectors, without leaving as acetone or methyl ethyl ketone. residue. The material has super CHEMTRONICS absorption which pulls soils and solvents 8125 Cobb Center Drive from end faces even in deeply recessed Kennesaw, GA 30152 USA MTP connections where wiping is 1-770-424-4888 REV. (05/14) difficult. Ideal size and dimension for MTP connector cleaning Seamless blunt design makes precise contact with MTP end face High absorbency swab quickly and safely removes contaminants Free of adhesives or binders will not leave residue Can be used with Electro-Wash PX Fiber Optic Cleaner for hard-to- remove soils Available in durable, field-ready, CC505F transparent tubes Patented U.S. Patent 7,526,830 and foreign patents TYPICAL APPLICATIONS Chemtronics MTP Connector Cleaning Swabs can be used to: Clean all MTP connectors Easily remove soil between and from alignment pins AVAILABILITY Product Swabs Swab Head Head Handle Handle Number per Length Material Width/Length Material Thickness Tube 0.09 x 0.88 0.09 x 0.060 3.25 (8. Synthetic CC505F 25 (2.3 mm x 22.3 ABS (2.3 mm x 1.6 25 cm) Chamois mm) mm ) 0.09 x 0.88 0.09 x 0.060 6 (15.4 Synthetic CC5056F 25 (2.3 mm x 22.3 ABS (2.3 mm x 1.6 cm) Chamois mm) mm ) TECHNICAL AND DIRECTIONS FOR USE APPLICATION ASSISTANCE 1. Lightly spot a QbE -2 wipe on the platen with Electro-Wash PX Chemtronics provides a technical hotline to Fiber Optic Cleaner, or with the answer your technical and application Fiberwash or MX pen. related questions. The toll free number is: 1- 2. Lightly touch the end of the MTO 800-TECH-401. Connector Swab to the wetted area to absorb some cleaning solution. Chemtronics , and QbE is a registered trademark of Chemtronics. All rights Wipe connector areas to be cleaned. reserved. Fiberwash is a trademark of 3. Use another MTP Connector Chemtronics. All rights reserved. Cleaning Swab to dry cleaned area, only if required. 2014 Chemtronics. All rights reserved. 4. Check your work with a fiber scope or measuring device. DISTRIBUTED BY: NOTE: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. Chemtronics does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it.