Rev. D (9/17) Page 1 of 2 Flux-Off No Clean Plus Flux Remover Product ES1696, ES896B, ES196, ES596, ES5596 Product Description Flux-Off No Clean Plus Flux Remover is an extra strength solvent that removes heavy and encrusted flux deposits. This high pressure aerosol or bulk liquid penetrates quickly to remove all types of flux, oxide particles, dust, grease and oil, then evaporates quickly leaving no residues. Powerful cleaner removes R, RA, RMA, and No Clean fluxes Non-corrosive, safe for metals Flammable Extra-strength Fast drying Removes encrusted, baked-on fluxes All-Way Spray valve even sprays upside down Typical Product Data and Physical Properties Available with BrushClean System Flash Point (TCC): -20F / -29C Evaporation Rate: >1 (butyl acetate =1) Typical Applications Specific Gravity: 0.706 Flux-Off No Clean Plus Flux Remover effectively cleans flux Appearance Clear, colorless liquid residues from: Odor Ethereal Chip Carriers Solubility in Water: Negligible Heat Sinks Kauri-Butanol 86 Metal Housings and Chassis (KB) Number Printed Circuit Boards Shelflife 5 years Plugs Relays and Contacts RoHS Compliant Yes Sockets Surface Mount Device Pads Solenoids Switches 1-770-424-4888 www.chemtronics.com Rev. D (9/17) Page 2 of 2 Flux-Off No Clean Plus Flux Remover Product ES1696, ES896B, ES196, ES596, Usage Instructions For industrial use only. Read SDS carefully prior to use. ES5596 Spray 4-6 from surface to clean. Wash parts from top to bottom, allowing the liquid to flush away flux residue. Flux-Off Compatibility No Clean Plus can be used to remove all types of fluxes in an Flux-Off No Clean Plus Flux Remover, like any cleaner, ultrasonic cleaner. should be tested on a non-critical area to determine plastics compatibility prior to use. Not recommended for ABS, acrylics, polycarbonates, polystyrenes and PVC. Availability ES1696 12 oz. / 340 g Aerosol ES896B 6 oz. / 170 g BrushClean Aerosol ES196 1 gal. / 3.7 L Liquid Material Compatibility ES596 5 gal. / 18.9 L Liquid ABS Non-Compatible ES5596 55 Gal. / 208 L Liquid Buna-N Non-Compatible EPDM Excellent Environmental Impact Data Graphite Excellent CFC 0.0% HDPE Excellent HCFC-141b 0.0% LDPE Good HCFC-225 0.0% Lexan Non-Compatible VOC 51% Neoprene Fair HFC 23.0% Noryl Non-Compatible nPB 0.0% Nylon 66 Excellent Cross-Linked PE Excellent CFC, HCFC-225, HCFC-141b, VOC, HFC, and nPB percentages shown are Polypropylene Excellent the content by weight. Polystyrene Non-Compatible PVC Non-Compatible Technical and Application Assistance Silicone Rubber Non-Compatible Chemtronics provides a technical hotline to answer your Teflon Excellent technical and application related questions. Viton Non-Compatible The toll free number is: 1-800-TECH-401. Note: This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it. 8125 Cobb Center Drive, Kennesaw, GA 30152 1-770-424-4888 www.chemtronics.com 1-770-424-4888 www.chemtronics.com