SW14035 Chemtronics

Rev. B (8/18) Page 1 of 2 Soder-Wick Lead-Free Desoldering Braid Product Description Soder-Wick Lead-Free is the state of the art in desoldering technology. It is specially designed for removal of todays high temperature lead-free solders. The single layer weave used for Soder-Wick Lead-Free braid is lighter in mass than any other desoldering braid available and allows for lead-free solder removal at lower temperatures. Soder-Wick Lead-Free responds faster than any other conventional desoldering braid. This unique design minimizes overheating and requires less contact time thus preventing heat damage to the PCB and sensitive components. For Lead-Free rework, Soder-Wick has the answer. Fastest wicking and heat transfer High capacity for solder uptake Halide free, no corrosive residues Minimizes risk of heat damage to pads, components and Typical Product Data and Physical Properties PBCs Flux Type: High-Temperature No Clean Can be used with Tin/Lead solders Type ROL0 RoHS compliant Specifications: ANSI/IPC J STD-004 MIL-F-14256 F Typical Applications No Clean Flux Spec: MIL-STD-883B Soder-Wick Lead-Free desoldering braid safely removes solder Bellcore TR-NWT-000078 from: ANSI/IPC J SF818 Thru-hole Components Shelf Life: 2 years SMT Pads and BGA Pads RoHS Compliant Yes Micro Circuits Terminals, Lugs and Posts Part Size Inches Color Size Metric Identification Script 1 .030 White/Gray 0.8mm 2 .060 Yellow 1.5mm 3 .080 Green 2.0mm 4 .110 Blue 2.8mm Static Dissipative Packaging Soder-Wick Lead-Free is packaged on Static Dissipative bobbins to minimize the risk of damage associated with static electricity. The static dissipative bobbins qualify as electrostatic discharge protective per MIL-STD-1686C and MIL-HDBK-263B and meet the static delay rate provision of MIL-B-81705C 1-770-424-4888 www.chemtronics.com Rev. B (8/18) Page 2 of 2 Soder-Wick Lead-Free Desoldering Braid Availability Usage Instructions 40 Series Lead-Free No Clean Flux For industrial use only. Read SDS carefully prior to use. 25 bobbins / bag 1) Choose a Soder-Wick Lead-Free braid width equal to Part Size Length Part Size Length or slightly larger than the pad or connection. 2) Choose a solder iron tip equal to or slightly larger than 40-1-5 1 5 the pad or connection. 40-2-5 2 5 40-2-10 2 10 3) Set temperature of iron between 600-750F. 40-3-5 3 5 40-3-10 3 10 4) Place wick on solder joint and place tip of hot iron on 40-4-5 4 5 40-4-10 4 10 top of wick. 5) As solder becomes molten, the color of the wick will Part Size change from copper to silver. VacuPak Packaging 6) Remove wick and iron from joint simultaneously once color change has stopped. The VacuPak Can contains SW140255 2 7) The component lead / pad is now clean and free from ten five-foot bobbins in a solder. vacuum sealed can. This 8) Clip and discard used portion of the wick SW14035 3 package provides the highest 9) If needed, clean PCB with CircuitWorks Lead-Free Flux Remover Pen CW9400 and remove soils with a level of cleanliness and ControlWipes absorbent wipe. freshness. Great for tool kit SW14045 4 storage. Soder-Wick Is Designed To Meet or Exceed the Following: Technical and Application Assistance Chemtronics provides a technical hotline to answer your MIL-F-14256F, Type R technical and application related questions. NASA-STD-8739.3 The toll free number is: 1-800-TECH-401. DOD-STD-883E, Method 2022 ANSI/IPC J STD-004, Type ROL0 Note: BELLCORE TR-NWT-000078 This information is believed to be accurate. It is intended for ANSI/IPC J SF-818 professional end users having the skills to evaluate and use the data properly. CHEMTRONICS does not guarantee the accuracy of the data and assumes no liability in connection Soder-Wick Bobbins Are Designed To Meet or with damages incurred while using it. Exceed: MIL-STD-2000A Chemtronics, Soder-Wick and CircuitWorks are registered trademarks of MIL-B-81705C Chemtronics. All rights reserved. Vacu-Pak and ControlWipes are trademarks of Chemtronics. All rights reserved. MIL-STD-1686C MIL-HDBK-263B ANSI/IPC J SF-818 8125 Cobb Center Drive, Kennesaw, GA 30152 1-770-424-4888 www.chemtronics.com 1-770-424-4888 www.chemtronics.com