TS-1D1S09A CH Products

TS series Hall effect miniature proportional joystick an APEM Group Company The TS Series Thumbstick is a proportional two axes joystick in a miniature package. Featuring non-contacting Hall effect technology for long life performance, the TS Series Thumbstick is available with multiple linear output options including single and dual (redundant) outputs. It is similar in size and operation to gamepad controls, but in a rugged industrial package. Typical applications include pendant and remote controls as well as joystick handle and arm rest integration. KEY FEATURES 1 or 2 axes Non-contact Hall effect technology Submersible to 1m (3.28ft) per IP68 Pressure washable to IP69K Redundant outputs available Rear or drop-in mounting available www.chproducts.comTS series Hall effect miniature proportional joystick OPTION SELECTION TS SERIES HANDLE TERMINATION* OUTPUT OPTIONS 0 0V to 5V (Rail to Rail) -0 None 1 22AWG 25cm PTFE 1 0.25V to 4.75V -1 Castle 2 28AWG 25cm PVC 2 0.5V to 4.5V -2 Winged Hat 3 1V to 4V -3 Conical 4 0V to 5V - Sensor 1 0V to 5V - Sensor 2 MOUNTING POWER SUPPLY LIMITER HARDWARE OPTIONS 5 0.25V to 4.75V - Sensor 1 U Single axis 0.25V to 4.75V - Sensor 2 N None A Single S Square 6 0.5V to 4.5V - Sensor 1 D Drop-in B Independent*** 0.5V to 4.5V - Sensor 2 R Rear mount 7 1V to 4V - Sensor 1 1V to 4V - Sensor 2 NOTES: 8 0V to 5V - Sensor 1 Mounting accessories. Standard hardware includes: 5V to 0V - Sensor 2 For the Drop-in option - 4 push in connectors, 9 0.5V to 4.5V - Sensor 1 drop-in bezel and an O-ring. 4.5V to 0.5V - Sensor 2 For the Rear mount option - 4 x 1/2 FH SS Phil Screws and a rear mount bezel. 10 0.25V to 4.75V - Sensor 1 4.75V to 0.25V - Sensor 2 * 1 - Wires are thick, robust, and best suited for stand alone applications. 2 - Wires are thin and best suited for tightly constrained wire routing. 11 1V to 4V - Sensor 1 ** Contact factory for PWM configuration. 4V to 1V - Sensor 2 *** Only available on dual output. 12 Customer specified 13 PWM** SPECIFICATIONS MECHANICAL (FOR X, Y AXES) Operating Force 3.1N0.5N (0.70lbf0.11lbf) Maximum Vertical Load 200N (45lbf) Maximum Horizontal Load 150N (33.7lbf)* Mechanical Angle of Movement 25 (50 total) Life Cycles >1 million Mass/weight 18.25g 3.0g (0.64oz0.11oz) Lever Action (Centering) Spring Centering ENVIRONMENTAL Operating Temperature -40C to +85C (-40F to +185F) Storage Temperature -40C to +85C (-40F to +185F) Sealing IP68, IP69K** EMC Immunity Level EN61000-4-3 EMC Emissions Level EN61000-6-3:2001 ESD EN61000-4-2 ELECTRICAL SENSOR Resolution 1.22mV Supply Voltage Range 5.00V0.01V Reverse Polarity Max -10V Overvoltage Max 20V Output Impedance 2 Return to Center Voltage Tolerance 250mV Error Signal 1.0% * Force applied to the top of the cap at full displacement. ** All options are IP68 and IP69K rated, however Drop-in mounting does not prevent panel ingress. Note: The company reserves the right to change specifications without notice. www.chproducts.com