V13 CFM10/15 SERIES 10/15 WATT OPEN FRAME AC-DC MODULES Features * Universal Input Range 85~264VAC * Efficiency to 83% * Meets EN55032 Class B * Approved IEC/EN/UL62368-1 * Continuous Short Circuit Protection * Leakage Current 0.25mA Max. e * PCB Mountabl CFM10 Series RIPPLE & LINE LOAD % EFF. OUTPUT OUTPUT VOLTAGE NOISE REGULATION REGULATION MODEL (Typ.) VOLTAGE CURRENT ACCURACY NOTE 1 NOET 2 NOTE 3 NOTE 4 73% CFM1001S 5V 2000mA 1% 1% 0.5% 1% CFM1002S 12V 840mA 1% 76% 1% 0.5% 1% CFM1003S 15V 670mA 1% 76% 1% 0.5% 1% 77% CFM1005S 24V 420mA 1% 1% 0.5% 1% CFM1007S 3.3V 2500mA 50mV 67% 1% 0.5% 1% CFM1009S 9V 1120mA 1% 72% 1% 0.5% 1% CFM15 SERIES RIPPLE & LINE LOAD %EFF. OUTPUT OUTPUT VOLTAGE NOISE REGULATION REGULATION MODEL (Typ.) VOLTAGE CURRENT ACCURACY NOET 1 NOTE 2 NOTE 3 NOTE 4 74% CFM1501S 5V 3000mA 1% 1% 0.5% 1% CFM1502S 12V 1250mA 1% 80% 1% 0.5% 1% CFM1503S 15V 1000mA 1% 81% 1% 0.5% 1% 83% CFM1505S 24V 630mA 1% 1% 0.5% 1% CFM1507S 3.3V 3000mA 50mV 69% 1% 0.5% 1% CFM1509S 9V 1670mA 1% 76% 1% 0.5% 1% Specifications are subject to change without notice 1 V13 Specifications CFM10/15 Series Derating Curve INPUT SPECIFICATIONS: 100% Voltage ..................................................................... 85~264Vac 75% 120~370Vdc Frequency ....... 47 to 63Hz 50% 20LFM(Natural Convection) Input Current ...... 100Vac/0.5A max., 240Vac/0.25A max. 25% Inrush Current .. Cold Start 25 . 20A max. 115Vac 40A max. 230Vac 0% Leakage Current . 0.25mA max. 0 10 20 30 40 50 60 70 o Ambient Temperature( C) OUTPUT SPECIFICATIONS: Holdup Time . 16ms typ. 115Vac Short Circuit Protection . Hiccup Mode (Auto Recovery) Over Voltage Protection ................... TVS Component to Clamp SAFETY AND EMC: Temperature Coefficient ............................... 0.05%/ Emission and Immunity .... EN55032 Class B, EN61000-6-3 EN61000-3-2, EN61000-3-3, EN55024 GENERAL SPECIFICATIONS: Isolation ... Input to output = 3000VAC EN61204-3, EN61000-6-1 Operating Temperature .................................. 0 ~ 70 (see derating curve) Safety ... IEC/EN/UL62368-1, IEC/EN/UL60950-1 Storage Temperature .................. -20~85 NOTE: Humidity ...................................................... 93% RH max. Non condensing 1. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Cooling .... Natural Convection Ripple & noise measuring 20MHz BW. Switching Frequency ...... CFM10: 100KHz Typical 2. Line regulation is measured from high line to low line with full load. CFM15: 67KHz Typical 3. Load regulation is measured from full to 10% load. MTBF .. MIL-HDBK-217F, GB, at 25/115VAC 200Khrs min. 4. Typical efficiency with 230VAC and max. load 25. Altitude ....... 2000m Dimensions CFM10: 2.599x1.772x0.906Inches (65.00x45.00x23.00mm) CFM15: 2.752x1.890x0.906Inches (69.90x48.00x23.00mm) Weight ...... CFM10: 60g (0.13Pounds) CFM15: 80g (0.18Pounds) Mechanical Specification All Dimensions are in inches(mm) Tolerance:Inches:X.XXX0.02 Millimeters:X.XX0.5 CFM10 Series CFM15 Series 0.220 5.60 VR 0.161 4.10 VR 2.559 65.00 2.752 69.90 0.039 1.00 0.039 1.00 0.071 1.80 0.071 1.80 2.126 54.00 2.441 62.00 Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 1.772 45.00 0.885 22.47 0.196 4.97 0.173 4.40 0.150 3.80 0.063 1.60 0.492 12.50 0.079 2.00 max 1.280 32.50 0.906 23.00 max 1.890 48.00 0.945 24.00 0.157 4.00 0.173 4.40 Rated Load(%) 0.150 3.80 0.063 1.60 0.492 12.50 0.079 2.00 max 1.398 35.50 0.906 23.00 max