CFM12S090-T Cincon

CFM12S SERIES 12 WATT OPEN FRAME AC-DC MODULES Features Universal Input Range 90~264Vac High Efficiency up to 87% 1.5x 1 Open Frame Compact Size Class II No Load Input Power < 75mW Approval IEC/EN/UL 62368-1 Approval IEC/EN 60335-1 Approval EN 55032 Class B and CISPR/FCC Class B Operating Altitude 5000m Continuous Short Circuit Protection Over Voltage Protection VOLTAGE RIPPLE& LINE LOAD %EFF. MODEL OUTPUT OUTPUT ACCURACY NOISE REGULATION REGULATION (Typ.) NUMBER VOLTAGE CURRENT NOTE1 NOTE2 NOTE3 NOTE4 NOTE5 CFM12S050 5 V 2 A 2% 100mV 1% 1% 80% CFM12S090 9 V 1.34 A 2% 100mV 1% 1% 85% CFM12S120 12 V 1.0 A 2% 120mV 1% 1% 85% CFM12S150 15 V 0.8 A 2% 150mV 1% 1% 85% CFM12S240 24 V 0.5 A 2% 240mV 1% 1% 87% Note: 1. Voltage accuracy is set at 100% full load. 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple & noise measurement 20MHz BW. 3. Line regulation is measured from 90V to 264V with 100% full load. ac ac 4. Load regulation is measured from 10% to 100% full load. 5. Typical efficiency at 230 V and 100% full load at 25. ac 6. T Version wafer with JST B3B-XH/B4B-XH and mate with JST housing XH series or equivalent. 7. L Version & EL Version Safety only approved only IEC/EN 60335-1. PART NUMBER Series Number of Outputs Nominal Output Voltage Type X XXX -XX CFM12 5V 050: Blank: PCB Mount 9V 090: E: Encapsulated CFM12 S: Single 120: 12V T: Wafer 15V L: Lead Wire 150: 24V EL: Encapsulated & Lead Wire 240: Part Number Example: CFM12S120-T: Open Frame, 12W, Single 12Vdc Output, Wafer www.cincon.com 1 REVISION: V16 CFM12S Series TECHNICAL SPECIFICATIONS (All specifications are typical at nominal input, full load at 25 unless otherwise noted.) ABSOLUTE MAXIMUM RATINGS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units 90 264 V ac Input Voltage Safety approvals only to the AC input All 120 370 V dc Operating Case Temperature See Derating Curve All -40 75 Storage Temperature All -40 85 IEC/EN/UL 62368-1 Operating Altitude All 5000 m IEC/EN 60335-1 INPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units Operating Voltage Range All 100 240 V ac Input Frequency Range All 50 60 Hz Maximum Input Current 100% Load, V =100V All 0.4 A in ac Leakage Current All 0.25 mA V =240V , Cold start at 25 Inrush Current All 50 A in ac OUTPUT CHARACTERISTICS PARAMETER NOTES and CONDITIONS Device Min. Typ. Max. Units CFM12S050 4.90 5 5.10 CFM12S090 8.82 9 9.18 Output Voltage Set Point V =Nominal V , I =Io max., T =25 CFM12S120 1176 12 12.24 V in in o c dc CFM12S150 14.70 15 15.30 CFM12S240 23.52 24 24.48 CFM12S050 2.0 CFM12S090 1.34 Operating Output Current Range A V =90V ~264Vac, See Derating Curve CFM12S120 1.0 in ac CFM12S150 0.8 CFM12S240 0.5 Holdup Time V =115V ms in ac All 10 Output Voltage Regulation Load Regulation 10% Load to full load % All 1.0 Line Regulation V =High Line to low line % in All 1.0 CFM12S050 6.3 CFM12S090 12.6 Over Voltage Protection Hiccup mode (Auto recovery) CFM12S120 V 15.8 dc CFM12S150 18.9 CFM12S240 31.5 CFM12S050 100 1. Add a 0.1uF ceramic capacitor and a CFM12S090 10uF aluminum electrolytic capacitor to 100 output Output Ripple and Noise CFM12S120 mV 120 2. Oscilloscope is 20MHz band width CFM12S150 150 3. Ambient Temperature=25 CFM12S240 240 CFM12S050 2000 CFM12S090 1340 1. V =115V and 230V in ac ac 2. Output is max. load Load Capacitance CFM12S120 uF 1000 3. Ambient temperature=25 CFM12S150 800 CFM12S240 500 www.cincon.com 2 REVISION: V16