V10
CFM12S SERIES
12 WATT SINGLE OUTPUT
AC-DC OPEN FRAME
Features
* Universal Input 90~264VAC
* High Efficiency up to 84%
* Meets EN55032 Class B and CIRSS/FCC Class B
* Approved IEC62368-1, UL62368-1
* Meets EN60335-1
* Continuous Short Circuit Protection
* Over Voltage Protection
* No load input power < 75mW
* Class II
Ordering information
CFM12SXXX - X
Blank: PCB mount
E: Encapsulated
T: WAFER
Ripple Voltage Line Load
Output Output % EFF.
MODEL (mV p-p) Accuracy Regulation Regulation
Voltage Current (typ.)
NOTE 1 NOTE 2 NOTE 3 NOTE 4
CFM12S050 5V 2A 100mV 2% 1% 1% 79%
CFM12S090 9V 1.34A 100mV 2% 1% 1% 83.26%
CFM12S120 12V 1.0A 120mV 2% 1% 1% 83.26%
CFM12S150 15V 0.8A 150mV 2% 1% 1% 83.26%
CFM12S240 24V 0.5A 240mV 2% 1% 1% 83.26%
Typical at 25C, nominal line and 75% load, unless otherwise Specified
1 V10
Specifications CFM12S Series De-rating Curve
INPUT SPECIFICATIONS:
Voltage ..................... 90~264Vac Derating curve:
Frequency ...... 47 to 63Hz 100
Inrush Current ..... 50A max. @240Vac, Cold Start @25
Leakage Current .. 0.25mA max. @ 264Vac 75
Input Current . 0.4A max.
50
OUTPUT SPECIFICATIONS:
Holdup Time 10ms typ. @115Vac
25
Short Circuit Protection Hiccup Mode (Auto Recovery)
Temperature Coefficient ........................... 0.05% /
0
Over Voltage Protection . ........Hiccup Mode(Auto Recovery)
-30 -20 -10 0 10 20 30 40 50 60 70
Startup time .....<3.0s
o
Ambient Temperature( C)
GENERAL SPECIFICATIONS:
Isolation Voltage(Input to Output) ...... 3000VAC:
SAFETY AND EMISSION:
Emission and Immunity.. EN55032 Class B, EN55024, EN61204-3,
Operating Temperature.............. -30 ~70 (Derating from 50 to 70 )
EN61000-3-2, EN6100-3-3,
Storage Temperature ....... -40~85
Cooling .... Natural Convection EN61000-6-1, EN61000-6-3.
47 CFR FCC Part 15 Subpart B (Class B)
Humidity .................................................... 93% RH max. Non condensing
Safety IEC62368-1,UL62368-1,IEC60950-1,UL60950-1
Switching Frequency ... 65KHz Typical
MTBF .. MIL-HDBK-217F, GB, 25/115VAC .. 450Khrs min.
NOTE:
Altitude .... 5000m 1. Voltage accuracy is set of 100% rated load.
Dimensions ... 1.500x1.000x0.764nches (38.10x25.40x19.40mm) 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
-E: 1.600x1.1x0.772 Inches (40.64x27.94x19.60 mm) ripple&noise measuring @20MHz BW.
-T: 2.150x1.000x0.681 Inches (63.50x25.40x17.30 mm) 3. Line regulation is measured from high line to low line with full load.
Weight . 16g, (-E): 40g, (-T): 17g 4. Load regulation is measured from 10% to 100% full load.
5. T Version wafer with JST B3B-XH / B4B-XH and mate with JST housing
XH series or equivalent..
Mechanical Specification
Typical at 25C, nominal line and 75% load, unless otherwise Specified
2
Rated Load(%)