V16 CFM60M SERIES 60W MEDICAL OPEN FRAME AC-DC MODULES Features * Universal Input Range 90~264VAC * 2x 4 Size * Efficiency to 90% * Continuous Short Circuit Protection * No Load Power Consumption<0.5W * Meets EN55011 and EN55032 Class B * IEC/EN/UL 60601-1 2MOPP Approval * IEC/EN/UL 60950-1 Approval * Meets IEC/EN60335-1 * Meets Class I RIPPLE & VOLTAGE LINE LOAD % EFF OUTPUT OUTPUT VOLTAGE MODEL (Typ.) NOISE ACCURACY REGULATION REGULATION VOLTAGE CURRETN ADJ. Range NOTE5 NOTE 2 NOTE 1 NOTE 3 NOTE 4 CFM60M050 5 V 8 A 1% 1% 4.75~5.25 0.5% 1% 82% CFM60M120 12 V 5 A 1% 1% 11.4~12.6 0.5% 1% 87% CFM60M150 15 V 4 A 1% 1% 14.25~15.75 0.5% 1% 88% CFM60M240 24 V 2.5 A 1% 1% 22.8~25.2 0.5% 1% 89% CFM60M480 48 V 1.25 A 1% 1% 45.6~50.4 0.5% 1% 90% Specifications are subject to change without notice. 1 4-M3x0.5P 4-0.125 3.18 V16 Specifications CFM60M Series Derating Curve Open Frame versions: INPUT SPECIFICATIONS: Voltage ........................................................... 90~264Vac 120~370Vdc Frequency ..... 47 to 63Hz Inrush Current . Cold Start 25 ............. 75A max. 240Vac Input Current .. 100Vac/1.6A max., 240Vac/0.8Amax. Leakage Current .... 100uA max. OUTPUT SPECIFICATIONS: Hold-up Time ... 16ms typ. 115Vac Short Circuit Protection ........ Hiccup Mode (Auto Recover) Over Voltage Protection ....... TVS Component to Clamp Covered versions: CFM60M050-CA Temperature Coefficient ............................... 0.05%/ GENERAL SPECIFICATIONS: Isolation .... Input to output = 4000VAC (5,656VDC) Operating Temperature (note 9) ................ -20 ~ 70 (see Derating Curve) Storage Temperature ........................ -20~85 Humidity ..................................................... 93% RH max. Non-Condensing Cooling ......... Natural Convection Switching Frequency .. 65KHz Typical MTBF . MIL-HDBK-217F, GB, 25/115VAC 200Khrs min. Altitude ... 3000m Dimensions .... 4.000x2.000x1.100inches (101.60x50.80x27.94mm) NOTE: 1. Voltage accuracy is set at full load and 25 Ta. CFM60MXXX-CA ... 4.606x2.362x1.575inches (117.00x50.80x40.00mm) Weight .. 125g 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for ripple&noise measuring 20MHz BW. SAFETY AND EMC: Emission and Immunity (Ed. 4.0) .. EN55011, EN55032 Class B, EN55024 3. Line regulation is measured from 100Vac to 240Vac with full load. FCC CFR 47 Part 15, 18, EN61204-3, EN61000-6-1 4. Load regulation is measured from 10% to 100% full load. EN61000-6-3, EN60601-1-2, EN61000-3-2, EN61000-3-3 5. Typical Efficiency at 230 VAC and Full Load at 25C Safety (Ed. 3.1) . Class I, IEC60601-1:2005+A1:2012, EN60601-1:2006/A1:2003 6. Standard input and output connectors (CN1 and CN2) wafer with UL ANSI/AAMI ES60601-1:2005, IEC60950-1, EN60950-1, UL60950-1 TAIWAN KING PIN TERMINAL PVHI series and mate with JST housing VHR series and JST SVH-21/41T-P1.1 series crimp terminal or Equivalent. 7. Optional Input and output connectors (CN1 and CN2) wafer with LONG CHU P3060 series and mate with MOLEX housing 5195 series and MOLEX 5194 series crimp terminal or equivalent. 8. Safety approvals do not apply to the covered versions, only to the open frame versions. 9. Others model refer to application note. Mechanical Specification CFM60MXXX CFM60MXXX-CA 4.606 117.00 VR CN1 LED ACN CN2 ACL 1 2 3 4 PE PE 0.150 3.80 0.846 21.50 3.701 94.00 4.000 101.60 2.362 60.00 0.236 6.00 Input connector CN1 Pin 1 Line Pin 2 Not Fitted Pin 3 Neutral Output connector CN2 Pin 1 + Vout Pin 2 + Vout 0.039 1.00 3.701 94.00 Pin 3 - Vout 2.441 62.00 0.236 6.00 Pin 4 - Vout All Dimensions in Inches mm Tolerance Inches:x.xxx0.02 Millimeters:x.xx0.5 Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 0.063 1.60 0.098 2.50 max 0.150 3.80 1.100 27.94 max 1.701 43.20 2.000 50.80 1.969 50.00 1.575 40.00 0.370 9.40 0.197 5.00 1.701 43.20 0.063 1.60 0.197 5.00