V13 CFM80S SERIES 80W WATT OPEN FRAME AC-DC MODULES Features * Universal Input Range 90~264VAC * Continuous Short Circuit Protection * Efficiency to 90% Typical * Meets EN55032 Class B and CISPR/FCC Class B * Meets EN61000-3-2 Class A * No Load Power Consumption<0.5W * 2x 4 Size RIPPLE& VOLTAGEA LINE LOAD % EFF. OUTPUT OUTPUT VOLTAGE MODEL NOISE ACCURACY REGULATION REGULATION (Typ.) VOLTAGE CURRENT ADJ. RANGE NOTE 2 NOTE 1 NOTE 3 NOTE 4 NOTE 5 CFM80S050 5 V 12 A 1% 1% 4.75~5.25 V 0.5% 1% 86% CFM80S120 12 V 6.7 A 1% 1% 11.4~12.6 V 0.5% 1% 89% CFM80S150 15 V 5.36 A 1% 1% 14.25~15.75 V 0.5% 1% 90% CFM80S240 24 V 3.35 A 1% 1% 22.8~25.2 V 0.5% 1% 90% CFM80S480 48 V 1.67 A 1% 1% 45.6~50.4 V 0.5% 1% 90% Specifications are subject to change without notice. 1 V13 Specifications CFM80S Series Derating Curve INPUT SPECIFICATIONS: Voltage ..................................................................... 90~264Vac Derating curve for Natural Convection 120~370Vdc 100% Frequency ......... 47 to 63Hz Inrush Current . Cold start 25100A max. 240Vac 75% Input Current .... 100Vac/1.5A max., 240Vac/0.8A max. Leakage Current ...... 3.5mA max. 50% OUTPUT SPECIFICATIONS: Holdup Time ... 12mS typ. 115Vac 25% Short Circuit Protection .... Hiccup Mode (Auto Recover) 20LFM(Natural Convection) Over Voltage Protection ........ TVS Component to Clamp 0% Temperature Coefficient ................................. 0.05%/ -20 -10 0 10 20 30 40 50 60 70 80 GENERAL SPECIFICATIONS: o Ambient Temperature( C) Isolation ... Input to output = 3000VAC Operating Temperature ............................ -20 ~ 80 (see derating curve) Storage Temperature ..................... -20~85 NOTE: Humidity ..................................................... 93% RH max. Non-Condensing 1. Voltage accuracy is set at full load. Cooling ......... Natural Convection 2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for Switching Frequency .. 100KHz Typical ripple&noise measurement 20MHz BW. Dimensions 3. Line regulation is measured from high line to low line with full load. Open Frame .. 4.000x2.000x1.07 inches (101.6x50.8x27.1 mm) 4. Load regulation is measured from 10% to 100% full load. -P .. 4.000x2.000x1.142 inches (101.6x50.8x29.00 mm) 5. Typical efficiency at 230 VAC and full load at 25C. Weight ...... 155g 6. Standard input and output connectors (CN1 and CN2) wafer with TAIWAN KING PIN TERMINAL PVHI series and mate with JST SAFETY AND EMC: Emission and lmmunity EN55032 Class B, FCC Part 15 Class B housing VHR series and JST SVH-21/41T-P1.1 series crimp terminal EN61000-6-3, EN61000-3-2, EN61000-3-3 or equivalent. EN55024, EN61204-3, EN61000-6-1 Safety Class I, IEC/EN/UL60950-1, IEC/EN/UL62368-1 Mechanical Specification All Dimensions in Inches mm Tolerance Inches:x.xxx0.02 Millimeters:x.xx0.5 CFM80SXXX CFM80SXXX-P (Input/Output Connector with PIN) CN1 CN1 CN2 CN2 1 ACL 1 1 ACL 1 2 2 2 3 ACN 2 3 ACN 3 4 4 5 5 6 6 CN1: PIN CONNECTION PE Pin Function PE 1 Line Neutral 2 PE 0.150 3.81 PE VR VR 3.700 93.98 0.150 3.81 3.700 93.98 4.000 101.60 4.000 101.60 CN2: PIN CONNECTION Pin Function 1 Vout(+) Vout(+) 2 Vout(+) 3 4 Vout(-) 5 Vout(-) Vout(-) 6 0.071 1.80 0.165 4.19 0.039 1.00 3.645 92.58 Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 0.906 23.00 max 0.098 2.50 max 0.063 1.60 0.150 3.81 1.700 43.18 2.000 50.80 1.210 30.73 0.312 7.92 0.150 3.81 0.173 4.39 0.063 1.60 LOAD(%) 0.906 23.00 max 1.142 29.00 max 0.156 3.96 0.150 3.81 0.785 19.93 1.700 43.18 2.000 50.80