CMPCMP C A B L E G L A N D A N D C A B L E C O N N E C T I O N S P E C I A L I S T S CXT CABLE GLAND CXT Industrial Cable Gland CMP CXT type brass indoor and outdoor cable gland for use with all types of screened flexible wire braid (e.g. CY/SY), or wire braid armour cable. The cable gland provides an environmental seal on the cable outer sheath. The cable gland also provides mechanical cable retention and electrical continuity via internal pig-tail termination of the flexible wire braid. The CMP CXT range of industrial cable glands is designed and tested to BS 6121:Part 1:1989, meets or surpasses the requirements of EN 50262 :1999, and is produced from Brass grade CuZn39Pb3 (CW614N) to EN12168. Other materials including Aluminium are also available in this standard design. CC TECHNICAL DATA Type CXT Design Specification BS 6121:Part 1:1989, EN 50262:1999 EN 50262 Mechanical Classifications Retention = Class B, Impact = Level 8, Continuous Operating Temperature -60C to +150C E Ingress Protection Rating IP66 Standard Gland Material Brass F Alternative Gland Material Electroless Nickel Plated Brass, Stainless Steel, Aluminium Seal Material CMP Formulated Thermoplastic Elastomer Screened and Flexible Wire Braid (e.g CY / SY), Wire Braid Armour, Cable Type Armored & Jacketed. AA Sealing Technique CMP Displacement Seal DD Sealing Area(s) Cable Outer Sheath Optional Accessories Adaptor/Reducer, Earth Tag, Entry Thread Seal, Locknut, Serrated Washer, Shroud Cable Gland Selection Table Minimum Cable Across Across Nominal Cable Cable Ordering PVC Bedding Entry Thread Thread Protrusion Gland Flats Corners Gland Reference Shroud Diameter A C Length Length Weight D D Reference* Size (Brass Metric) E F (Kgs) Max Max Min Max 20S/16 M20 15.0 3.1 8.7 24.0 26.6 18.0 20S16CXT1RA PVC04 0.058 20S M20 15.0 6.1 11.7 24.0 26.6 18.0 20SCXT1RA PVC04 0.058 20 M20 15.0 6.5 14.0 27.0 30.0 20.0 20CXT1RA PVC05 0.062 25 M25 15.0 11.1 20.0 36.0 40.0 26.0 25CXT1RA PVC09 0.120 32 M32 15.0 17.0 26.3 41.0 45.5 26.0 32CXT1RA PVC10 0.134 40 M40 15.0 23.5 32.2 50.0 55.5 26.0 40CXT1RA PVC13 0.182 50S M50 15.0 31.0 38.2 55.0 61.5 28.0 50SCXT1RA PVC14 0.236 50 M50 15.0 35.6 44.1 60.0 66.5 28.0 50CXT1RA PVC17 0.244 63S M63 15.0 41.5 50.0 70.0 77.6 28.0 63SCXT1RA PVC20 0.377 63 M63 15.0 47.2 56.0 75.0 83.0 30.0 63CXT1RA PVC22 0.374 75S M75 15.0 54.0 62.0 80.0 88.7 30.0 75SCXT1RA PVC24 0.456 75 M75 15.0 61.1 68.0 85.0 94.3 32.0 75CXT1RA PVC26 0.388 90 M90 15.0 66.6 79.4 108.0 119.7 40.0 90CXT1RA PVC31 1.480 100 M100 15.0 76.0 91.0 123.0 136.0 45.0 100CXT1RA 150/50HST 1.575 115 M115 15.0 89.0 98.0 133.4 148.0 48.0 115CXT1RA 180/60HST 2.322 130 M130 15.0 97.0 115.0 146.1 162.0 52.0 130CXT1RA 180/60HST 3.400 All dimensions in millimetres Note: *LSF Shrouds also available on request. Marine approvals including Lloyds, DNV & ABS are also available from CMP Products. 83 www.cmp-products.com INDUSTRIAL CABLE GLANDSX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Wire Identification category: Click to view products by CMP manufacturer: Other Similar products are found below : CU6337-000 CU6342-000 FCA-410-12 11631010 1-1768037-1 1-1768037-2 1-1768050-0 PXLK-VI Q62184-1 A64304-000 QMT221 HK032WE1NF038B 1330-0519-10 1395199-1 1395200-1 1395202-1 DMVF050WE-300S6 D-SCE-1K-2.4-50-4-CS7834 1538738-1 E90935-000 EC1238-000 EC1465-000 EC1855-000 EC1859-000 EC1863-000 EC5415-000 EC7277-000 EC7352-000 EC7603-000 EC7707-000 EC7735-000 EC7768-000 EC7828-000 EC7854-000 EC7952-000 EC8128-000 1768037-8 1768041-7 NC-127191-10-9 HS048WE2NF038B C03232-000 HTCM-SCE-14-4H-9 HTMS-3/16-9 HT-SCE-1/4-2.0-4 HT-SCE-3/16-2.0-4 HTTMS-1/2-1.50-9 HTTMS- CM-1/2-4H-9 HX-SCE-19.0-50-9 HX-SCE-6.4-50-4 C25254-000