Safran Colibrys Tactical Grade MS1000 Inertial MEMS Accelerometer Coming Soon Safran Colibrys is proud to announce MS1000 the best open Leading edge long term loop MEMS accelerometer in its class. bias repeatability In-run bias stability: 20 This tactical-grade sensor is designed for advanced inertial applications such as AHRS & Flight Control Systems, tactical g (10g) IMUs, land & marine navigation, and high-end industrial systems. Low noise: 34 g/Hz (10g) Using the same tiny hermetically sealed package (LCC20) used for Safran Colibrys other sensor families, the MS1000 features a Differential analog new MEMS design along with improved electronics that lead to output signal unbeatable performance in terms of bias stability, residual error, and low-noise. Low consumption (3mA 3.3V) Each sensor, embedded with a one-axis capacitive bulk MEMS accelerometer and integrated circuitry, delivers highly stable analog acceleration and temperature measurements, as well as digital functions including self-test, overload, and power-on reset. Stay up to date at Colibrys.com/MS1000 Key Parameter, typical values MS1002* MS1005** MS1010* MS1030** MS1100** Unit Full-Scale acceleration 2 5 10 30 100 g Residual Bias modeling error 0.2 0.5 1.0 3.0 10.0 mg (-40 to 85 C) In run bias stability 4 10 20 60 200 g Residual Scale factor modeling error (-40 to 85 C) 300 300 300 300 300 ppm Scale Factor Sensitivity 1330 540 270 90 27 mV/g Resolution (1Hz) 7 17 34 102 339 g rms Non Linearity (IEEE norm) 0.3 0.3 0.3 0.3 0.3 % FS Temperature range -40 to 125 C * Initial products available ** Products in developmentX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for colibrys manufacturer: Other Similar products are found below : TS1010TB