SMD Transient Voltage Suppressor ATV06A130-HF Thru. ATV06A400-HF Working Peak Reverse Voltage: 13 to 40 Volts Peak Pulse Power: 600 Watts RoHS Device Halogen Free DO-214AC (SMA) Features 0.179(4.55) - Glass passivated chip. 0.161(4.10) - Low leakage. - 600W peak pulse power capability with a 10/1000 s 0.064(1.63) 0.109(2.76) 0.048(1.23) 0.099(2.51) waveform, repetitive rate (duty cycle): 0.01%. - Uni and Bidirectional unit. - Excellent clamping capability. 0.206(5.22) - Very fast response time. 0.192(4.87) 0.012(0.30) - AEC-Q101 Qualied 0.006(0.15) 0.089(2.26) 0.077(1.96) Mechanical data 0.008(0.20) 0.059(1.51) 0.000(0.00) 0.030(0.75) - Case: SMA/DO-214AC, molded plastic. - Epoxy: UL 94V-0 rate ame retardant. Dimensions in inches and (millimeter) - Lead: Solderable per MIL-STD-750, method 2026. Circuit Diagram - Polarity: Color band denotes cathode end except bipolar. - Mounting position: Any. Bi-directional Uni-directional Maximum Ratings and Electrical Characteristics Ratings at 25C ambient temperature unless otherwise specied. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Characteristics Value Units Peak power dissipation with a 10/1000 s PPP 600 W waveform (Note 1) Peak pulse current with a 10/1000 s IPP See Next Table A waveform (Note 1) Power dissipation on innite heatsink at PD 3.0 W TL=75C Peak forward surge current, 8.3ms single IFSM 60 A half sine-wave, uni-directional only (Note 2) Maximum instantaneous forward voltage VF 3.5 V at 25A for uni-directional only Operating junction temperature range TJ -55 to +150 C Storage temperature range TSTG -55 to +150 C 1. Non-repetitive current pulse per Fig.5 and derated above Notes: Ta=25C per Fig.1 2. Measured on 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. Company reserves the right to improve product design , functions and reliability without notice. REV:A AQW-JTV09 Page 1 Comchip Technology CO., LTD.SMD Transient Voltage Suppressor Rating and Characteristic Curves (ATV06A130-HF Thru. ATV06A400-HF) Fig.1 - Pulse Derating Curve Fig.2 - Max. Non-repetitive Surge Current 125 80 TJ=TJ max. 8.3 ms single half sine-wave 100 60 75 40 50 25 25 0 0 0 25 50 75 100 125 150 175 1 10 100 Ambient Temperature, TA (C) Number of Cycles at 60Hz Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve 4.0 100 3.0 10 2.0 1 1.0 0.1 0 0 25 50 75 100 125 150 175 0.1 1 10 100 1000 10000 Lead Temperature, TL (C) Pulse Width, td (s) Fig.5 - Pulse Waveform Fig.6 - Peak Pulse Power Rating Curve 10000 120 Tr = 10 s Bi-directional TJ = 25C zero bias Pulse width (td) is dened as the point where the peak 100 Peak value IPP current decays to 50% of IPP 1000 Uni-directional zero bias Uni-directional VRWM Half value = IPP/2 100 50 Bi-directional 10/1000 s. Waveform 10 VRWM as dened by R.E.A. TJ=25C td f=1.0MHz 0 1 0 1 2 3 4 1 10 100 1000 Time, (ms) Reverse Breakdown Voltage, VBR (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A AQW-JTV09 Page 2 Comchip Technology CO., LTD. Peak Pulse Current, (%) Steady State Power Dissipation, (W) Peak Pulse Derating in Percentage of Peak Power or Current, (%) Junction Capacitance, CJ (pF) Peak Power, (kW) Peak Forward Surge Current, (A)