382LX104M016A082 Cornell Dubilier

Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available The excellent value of Type 380L/LX capacitors finds application in switching power supply input and output circuits and even motor drives where the high surface area of multiple units in parallel approaches the ripple capability of our Type 520C computer-grade capacitor. Type 380LX delivers more capacitance per can size while Type 380L available in the largest case sizes gives lower ESR for the same capacitance. Types 382L and 382LX give the choice of 4 or 5 leads for stable, reverse proof mounting. Highlights - Latest available ratings, worldwide - Top performance in power supplies and motor drives - Big selection of 49 case sizes - 2, 4 and 5 leads available Specifications Temperature Range 40 C to +85 C 250 Vdc 25 C to +85 C 315 Vdc Rated Voltage Range 16 Vdc to 500 Vdc Capacitance Range 33 F to 270,000 F Capacitance Tolerance 20% Leakage Current 3CV A at 5 min Ambient Temperature Ripple Current Multipliers 45 C 60 C 70 C 85 C 1.5 1.4 1.3 1.0 Frequency 10 50 Hz 60 Hz 120 Hz 500 kHz 1 kHz kHz & Up 16 - 100 WV 0.93 0.95 1.00 1.05 1.08 1.15 160 - 450 WV 0.75 0.80 1.00 1.20 1.25 1.40 Low Temperature Characteristics Impedance ratio: Z Z 20C +25C 8 (1650 Vdc) 4 (63100 Vdc) 3 (150500 Vdc) Endurance Life Test 3,000 h full load at +85 C Capacitance 20% ESR 200% of limit DCL 100% of limit Shelf Life Test 1,000 h 85 C Capacitance 20% ESR 200% of limit DCL 100% of limit Vibration 10 to 55 Hz, 0.06 and 10 g max, 2 h in each plane RoHS Compliant CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864)843-2277 Fax: (864)843-3800 Type 380LX / 382LX 85 C High Capacitance, Snap-In Aluminum 2, 4 and 5 pin styles available Part Numbering System 382LX 272 M 200 N05 2 V Case Type Cap Tolerance Voltage Code Insulation of pins 380L / LX (2 pins) 272 = 2700 F M = 20% 200 = 200 Vdc 2 = PVC Blank = 2 pins / 4 pins snap-in 6.3mm L 382L / LX (4 or 5 pins) 333 = 33000 F A = 2 pins snap-in 4.0mm L VS = 5 pins snap-in 6.3mm L V = 5 pins standoff Outline D rawings Dimensions shown are in mm Two Pins 380L/LX (22 through 40 mm diameter) Available in 2, 4 and 5 pins +0.2 0.8 -0.1 2.0max. 1.5 0.2 Top of Capacitor Body 6.3 mm pin length 6.3 pin length Four Pins 382L/LX (35, 40 and 45mm diameter) Available in 2 and 4 pins Available in 2 and 4 pins +0.2 0.8 -0.1 2.0max. 3.5 1.5 0.2 Top of Capacitor Body 4.0 pin length4.0 mm pin length L 2 max. option (add A to end of part ) Five Pins 382L/LX (40 and 50mm diameter) Available in 5 pins 0.7 1.5 0.1 Top of Capacitor 3.75 0.1 Body 0.6 min. 5 pin Standoff pin style (add V to end of part ) L 2 max. Connection Terminal 40 mm Dia. 50 mm Dia. Notes: A dummy negative () * Use dummy terminals for mechanical support only. Make no electrical connection because they resistively connect B dummy dummy through the electrolyte to the negative terminal. C positive (+) positive (+) ** Safety Vent may be on the bottom or on the side of the can. D dummy positive (+) negative () negative () CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864)843-2277 Fax: (864)843-3800 4.0 4.0 6.3 1