Type SF Motor-Run and Power Supply Capacitors Oil Filled/Impregnated, AC Rated, Metallized Polypropylene Capacitors Type SF, AC rated metallized polypropylene capacitors provide starting torque and power factor correction for split phase motors typically used in refrigeration and air conditioning motor- run applications. Type SF also may be used to provide noise suppression, voltage regulation and line current reduction in power supply applications. Highlights - Self healing - Fault current protection up to 10,000 amps AFC - Low energy consumption - 4 - tine, 1/4 quick connect lug terminals are standard - Meets EIA Standard EIA-456-A - UL recognized File Number E71645 Click here to view hardware Specifications - CSA File Number 223507 Capacitance Range 5.0 F to 120.0 F Capacitance Tolerance 10% standard, 6% and 3% available Rated Voltage 240 Vac to 660 Vac Operating Temperature Range 40 C to 70 C standard, 90 C available Dissipation Factor <0.1% Service Life Objective 60,000 h with 94% survival rate RoHS Compliant Capacitance vs. Temperature Service Life Objective The service life objective for this series is 60,000 hours of The Capacitance vs. Temperature curve may be used to determine operating life with a 94% survival rate when operated at the capacitance change as a function of temperature. Capacitance full voltage, 60 Hz, and rated ambient temperature. AC ca- varies by no more than 3% over the operating temperature range. pacitors are frequently used at voltages and ambient tem- peratures other than rated conditions. Service life may be estimated under specific conditions of temperature and voltage by using the curves as shown below and to the Capacitance vs. Temperature right. Life vs. Temperature 10000 20 20 0 40 60 80 1000 100 Life vs. Voltage 10 125 50 75 100 25 CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 % of Rated LifeType SF Motor-Run and Power Supply Capacitors Oil Filled/Impregnated, AC Rated, Metallized Polypropylene Capacitors Part Numbering System SF C 37 T 35 K 291 B -F Series Case AC Volt Case Material Cap Tol. % Can Height VAR RoHS SF A = 1 1/4 Oval 24 = 240 Vac T = Aluminum 7 = 7.0 F L = 3% 238 = 2.38 A = 2 way 70C Compliant B = 1 1/2 Oval 37 = 370 Vac w/steel cover 35 = 35.0 F H = 6% 291 = 2.91 B = 4 way 70 C -F = Compliant C = 1 3/4 Oval 44 = 440 Vac K = 10% 388 = 3.88 C = 2 way 90 C D = 2.0 Oval 66 = 660 Vac 475 = 4.75 D = 4 way 90 C P = 1 3/4 Round 488 = 4.88 E = Dual 2,3,4 70 C S = 2.0 Round F = Forks 70 C T = 2 1/2 Round G = Forks 90 C H = Forks 100 C J = Forks, 70 C Res. K = Forks, 90 C Res. Options L = Forks 100 C Res. Capacitors in aluminum cases with mounting studs, are available upon request. Z = Other Tighter capacitance tolerances such as 3% or 6% are available. +90 C ratings are available for HID lighting and power supply applications. Discharge resistors are available. Special terminal lugs such as 2 tines plus 1 fork lug are available. Dual capacitance values are available for 370 Vac and 440 Vac applications. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830