Type SPSX Solid Polymer Aluminum SMT Capacitors The solid polymer SPSX aluminum capacitor is an ideal choice for audio/visual equipment, home appliances, computers, measuring equipment and industrial robots. Like the SPCX, the SPSX is a compact component. But SPSX oeff rs a much lower ESR and a higher ripple current rating than the SPCX. The SPSX is a green product and RoHS compliant. Highlights Complies with the EU Directive 2002/95/EC A low-profile height of 1.9 mm requirement restricting the use of Lead (Pb), Oerff ed on tape and reel Mercury (Hg), Cadmium (Cd), Hexavalent chro- Can withstand 260 C reflow for 10 s mium (Cr(VI)), PolyBrominated Biphenyls (PBB) andPolyBrominated Diphenyl Ethers (PBDE). 4.5 - 9 m ESR 100 kHz A great value in a small package Specifications Operating Temperature Range: 40 C to +105 C Capacitance Range: 82 F to 560 F Operating Working Range: 2.0, 2.5, 4.0, 6.3 Vdc Capacitance Tolerance: 20 % (120 Hz 20 C) Surge Voltage: Vdc 2.0 2.5 4.0 6.3 Surge 2.5 3.1 5.0 8.0 Rated Ripple Current: See ratings table Life Test: Surge Test: Test temperature is +15 C to +35 C in series with Apply rated voltage at +105 C 2 C for 1000 h a 1000 resistor with the surge voltage applied for * Leakage current: ratings table values 1000 cycles of 305 s (ON) and 5 min 30 s (OFF) * Capacitance: 10% of initial measured value Leakage current: I0.1CV * DF: ratings table values Capacitance: 10% of initial measured value * Appearance: No abnormal change to occur DF: the values in the ratings table Moisture Resistance: Appearance: No abnormal change to occur +60 C 2 C 90% RH rated voltage for 500 h Vibration: * Leakage current: rating table values 10 Hz to 2000 Hz to 10 Hz frequency applied one * Capacitance: +70%, 20% (2V, 2.5V) cycle per 20 min at a total amplitude of 1.5 mm. +60%, 20% (4V) Direction and duration of vibration will be 2 h each in +50%, 20% (6.3V) the X,Y and Z planes for total of 6 h with the capacitor of initial measured value soldered in place. * DF: 200% of initial specified value Appearance No abnormal change to occur. * Appearance: No abnormal change to occur Capacitance: Measured value to be stabilized Shelf Life Test: during test, when measured several times within 30 min before completion of test. +105 C 2 C for 500 h Leakage current: rating table values Capacitance: 10% of initial measured value DF: ratings table values Appearance: No abnormal change to occur CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com OBSOLETEType SPSX Solid Polymer Aluminum SMT Capacitors Outline Drawings + - H S S L W1 W2 W2 L (0.2) W1 (0.2) W2 (0.1) H (0.2) S (0.3) Surface finish of terminal Tin (Sn) 7.3 mm 4.3 mm 2.4 mm 1.9 mm 1.3 mm Marking W1 Polarity Stripe (Anode) Capacitance + W.V. Code d = 2.0 V Lot Code e = 2.5 V g = 4.0 V j = 6.3 V Part Numbering System SPSX 221 M 0E R -7 Type Capacitance Capacitance Voltage Code Packaging Optional Lower ESR Value at 100 Code Tolerance 02 = 2.0 Vdc Code kHz (see tables 820 = 82 M = 20% 0E = 2.5 VDC R = Tape & Reel: for available op- 3500 pcs/reel 101 = 100 04 = 4.0 Vdc tions) 221 = 220 06 = 6.3 Vdc B = Bulk CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com OBSOLETE