Ordering information
AC-DC Power Supplies Open Frame/Enclosed type
LC A 10 S -5 -O
LCA10S
123456
1Series name
R Recommended EMI/EMC Filter
2100/120V input
NAC-06-472
3Output wattage
4Single output
5Output voltage
6Optional *3
C :with Coating
G :Low leakage current
Y :with Potentiometer
High voltage pulse noise type : NAP series
Low leakage current type : NAM series
*The EMI/EMC Filter is recommended
*to connect with several devices.
MODEL LCA10S-5 LCA10S-5-H LCA10S-12 LCA10S-15 LCA10S-24
MAX OUTPUT WATTAGE[W] 10 10 10.8 10.5 12
DC OUTPUT 5V 2A 5V 2A 12V 0.9A 15V 0.7A 24V 0.5A
SPECIFICATIONS
MODEL LCA10S-5 LCA10S-5-H LCA10S-12 LCA10S-15 LCA10S-24
VOLTAGE[V] AC85 - 132 1 or DC110 - 170
f
( )
CURRENT[A] ACIN 100V 0.3typ Io=100%
FREQUENCY[Hz] 47 - 440 or DC
INPUT
EFFICIENCY[%] 71typ 71typ 75typ 75typ 78typ
( )
INRUSH CURRENT[A] ACIN 100V 25typ Io=100%
( , , )
LEAKAGE CURRENT[mA] 0.5max 60Hz According to UL CSA and DEN-AN
LCA
VOLTAGE[V] 5512 15 24
CURRENT[A] 22 (Peak 3) 0.9 0.7 0.5
LINE REGULATION[mV] 20max 20max 48max 60max 96max
LOAD REGULATION[mV] 40max 40max 100max 120max 150max
1
0to+50 * 80max 80max 120max 120max 120max
C
RIPPLE[mVp-p]
*1
-10-0 140max 140max 160max 160max 160max
C
*1
0to+50 120max 120max 150max 150max 150max
C
OUTPUT RIPPLE NOISE[mVp-p]
1
-10-0 * 160max 160max 180max 180max 180max
C
TEMPERATURE REGULATION[mV] 50max 50max 120max 150max 240max
*2
DRIFT[mV] 20max 20max 48max 60max 96max
START-UP TIME[ms] 100max (ACIN 85V, Io=100%)
( , ) ( , )
HOLD-UP TIME[ms] 10typ ACIN 85V Io=100% 20typ ACIN 100V Io=100%
( , , )
OUTPUT VOLTAGE ADJUSTMENT RANGE[V] Fixedwhich can be adjusted the output is available as optional:5V -5 to +10% : 12 15 24V 10%
t
OUTPUT VOLTAGE SETTING[V] 4.9 - 5.3 4.9 - 5.3 11.5 - 12.5 14.4 - 15.6 23.0 - 25.0
( )
OVERCURRENT PROTECTION Works over 105% of rating works over 105% of peak current at option -H and recovers automatically
,
OVERVOLTAGE PROTECTION Works over 115% of rating by zener diode clamping
PROTECTION
CIRCUIT AND OPERATING INDICATION Not provided
OTHERS
REMOTE SENSING Not provided
REMOTE ON/OFF Not provided
INPUT-OUTPUT AC2,000V 1minute, Cutoff current = 10mA, DC500V 50M min (At Room Temperature)
W
, , , ( )
ISOLATION INPUT-FG AC2 000V 1minute Cutoff current = 10mA DC500V 50M min At Room Temperature
W
, , ( )
OUTPUT-FG AC500V 1minute Cutoff current = 100mA DC500V 50M min At Room Temperature
W
OPERATING TEMP.,HUMID.AND ALTITUDE -10 to +60 , 20 - 90%RH (Non condensing)(Refer to DERATING CURVE), 3,000m (10,000feet) max
C
, , ( ), , ( , )
STORAGE TEMP. HUMID.AND ALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max
C
ENVIRONMENT
2
, ( ), , ,
VIBRATION 10 - 55Hz 19.6m/s 2G 3minutes period 60minutes each along X Y and Z axis
2
IMPACT 196.1m/s (20G), 11ms, once each X, Y and Z axis
SAFETY AND
,
AGENCY APPROVALS UL60950-1 CSA C22.2 No.60950-1 Complies with DEN-AN
NOISE
,
CONDUCTED NOISE Complies with FCC-B VCCI-B
REGULATIONS
CASE SIZE/WEIGHT 49 17 94mm (W H D) / 65g max
X X X X
OTHERS
COOLING METHOD Convection
*1 Measured by 20MHz oscilloscope or Ripple-Noise meter(equivalent to KEISOKU-GIKEN : RM101).
*2 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C with the input voltage held constant at the rated input/output.
*3 Please contact us about safety approvals for the model with option.
* Avoid prolonged use under over-load.
LCA-2LCA10S
External view
LCA
Performance data
STATIC CHARACTERISTICS (LCA10S-5) RISE TIME & FALL TIME (LCA10S-5)
OVERCURRENT CHARACTERISTICS (LCA10S-5) DERATING CURVE
LCA-3