Ordering information AC-DC Power Supplies Open Frame/ Enclosed Type LEP 100 F -24 -O LEP100F 1 2 3 4 5 1 Ser ies name Example recommended EMI/EMC filter R 2 Output wattage NAC-06-472 3 Universal input 4 Output voltage 5 Optional *1 *6 G : Low leakage current R : with Remote ON/OFF S : with Chassis SN:with Chassis & co ver High voltage pulse noise type : NAP series T : V ertical terminal block Low leakage current type : NAM series U : Operating stop voltage * A higher current rating EMI/EMC filter is set at a lower value may be recommended in view of the Z : with ZT other devices that could be connected in parallel with the power supply. *Make sure necessary tests will be carried out on your end equipment with the power supply installed in accordance with any required EMC/EMI regulations. MODEL LEP100F-24 LEP100F-36 LEP100F-48 DC OUTPUT +24V 4.2(Peak 7)A +36V 2.8(Peak 4.7)A +48V 2.1(Peak 3.5)A SPECIFICATIONS MODEL LEP100F-24 LEP100F-36 LEP100F-48 VOLTAGE V AC85 - 264 1 or DC 120- 370 f ( ) ACIN 100V 1.4typ Io=100% CURRENT A ACIN 200V 0.7typ (Io=100%) ( ) FREQUENCY Hz 50/60 47 -63 or DC ACIN 100V 81typ (Io=100%) 82typ (Io=100%) 83typ (Io=100%) EFFICIENCY % ( ) ( ) ( ) INPUT ACIN 200V 84typ Io=100% 85typ Io=100% 85typ Io=100% ACIN 100V 0.98typ (Io=100%) POWER FACTOR ( ) ACIN 200V 0.93typ Io=100% ACIN 100V 15typ (Io=100%)(At cold start)(Ta=25 ) C INRUSH CURRENT A ( )( )( ) ACIN 200V 30typ Io=100% At cold start Ta=25C LEAKAGE CURRENT mA 0.75max (60Hz, Accordingto IEC60950and DEN-AN) VOLTAGE V +24 +36 +48 CURRENT A *2 0- 4.2 (Peak 7) 0- 2.8 (Peak 4.7) 0- 2.1 (Peak 3.5) ( ) ( ) ( ) WATTAGE W 100.8 Peak 168 100.8 Peak 169.2 100.8 Peak 168 LINE REGULATION mV 48max 48max 48max LOAD REGULATION mV 76max 90max 150max 0to +50 *3 120max 120max 150max C RIPPLE mVp-p 3 -10 -0 * 160max 160max 300max C 0to +50 *3 150max 150max 250max C OUTPUT RIPPLE NOISE mVp-p 3 -10 -0 * 180max 180max 350max C 0to +50 120max 150max 240max C TEMPERATURE REGULATION mV -10to +50 145max 180max 300max C DRIFT mV *4 48max 48max 48max ( , ) START-UP TIME ms 500max ACIN 100V Io=100% HOLD-UP TIME ms 20typ (ACIN 100V, Io=100%) OUTPUTVOLTAGE ADJUSTMENT RANGE V 21.4- 26.4 26.4 - 39.6 39.6 - 52.8 OUTPUTVOLTAGE SETTING V 23.0- 25.0 35.0 - 37.0 46.0 - 50.0 OVERCURRENT PROTECTION Worksover 101% of peak currentand recovers automatically PROTECTION CIRCUIT AND OVERVOLTAGE PROTECTION Worksat115 - 140% of rating OTHERS ( ) REMOTE ON/OFF Option Refer to InstructionManual INPUT-OUTPUT RC *5 AC3,000V1minute, Cutoff current= 10mA, DC500V 50M min (At RoomTemperature) - W , , , ( ) INPUT-FG AC2 000V1minute Cutoff current= 10mA DC500V 50M min At RoomTemperature W ISOLATION OUTPUT RC-FG *5 AC500V1minute, Cutoff current= 100mA, DC500V 50M min (At RoomTemperature) - W 5 , , ( ) OUTPUT-RC * AC100V1minute Cutoff current= 100mA DC100V 10M min At RoomTemperature W OPERATING TEMP.,HUMID.ANDALTITUDE -10 to +70 , 20 - 90%RH (Non condensing)(Referto DERATINGCURVE), 3,000m (10,000feet) max C , , ( ), , ( , ) STORAGE TEMP. HUMID.ANDALTITUDE -20 to +75 20 - 90%RH Non condensing 9 000m 30 000feet max C ENVIRONMENT 2 VIBRATION 10 - 55Hz, 19.6m/s (2G), 3minutes period, 60minutes each alongX, Y and Z axis 2 ( ), , , IMPACT 196.1m/s 20G 11ms once eachX Y and Z axis AGENCY APPROVALS UL60950-1, C-UL(CSA60950-1), EN60950-1, EN60065, EN50178 Complies with DEN-ANand IEC60950-1 (At only AC input) SAFETYAND , , , NOISE CONDUCTEDNOISE Complies with FCC-B CISPR22-B EN55022-B VCCI-B REGULATIONS 7 HARMONICATTENUATOR Complies with IEC61000-3-2 * ( ) ( ) CASE SIZE/WEIGHT 75 35 222mm 2.95 1.38 8.74 inches W H D /380g max with chassis & cover : 650g max X X X X X X OTHERS COOLINGMETHOD Convection *1 Specification is changed at option, refer to Instruction Manual 6. *5 Applicab le when remote control (optional) is added. *2 Peak loading for 10sec. And Duty 35% max, refer to Instruction Manual 5. In detail. *6 Please contact us about saf ety approvals for the model with option. *3 This is the value that measured on measuring board with capacitor of 22mF within 150mm *7 Please contact us about class C . from output terminal.Measured by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to * P arallel operation with other model is not possible. KEISOKU-GIKEN: RM101). * Der ating is required when operated with chassis and cover. *4 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, * A sound ma y occur from power supply at peak loading. with the input voltage held constant at the rated input/output. LEP-2 LEP100F External view + 0.5 8 235- Voltage adjust 4-M4 9.25 0.31 0.14 Name plate 3-3.5 2-4.5 Mounting 0.18 Hole Mounting Hole CN2 1 CN1 CN2 CN1 -V C119 4 5 FG 5 3 Input(N) +V 1 Input(L) 8 CN3 CN4 (176) Connector for Remote CN4 CN3 ON/OFF (option) 6.93 + 0.5 5 212 - 3.5-4.0 0.14-0.16 0.2 8.35 Mounting Hole 252 222 Connector for 9.92 4.5 8.74 -Z (option) + 0.5 8 0.18 235- 2-M4 9.25 0.31 Mounting Hole CN4 CN3 RC(-) PCB t=1.6 RC(+) + COM - 0.06 PIN CONNECTION CN1 CN2 CN3 (Option) Weight: 380g max I / O Connector Mating Connector Terminal Pin No. Input Pin No.Output Pin No. Remote ON/OFF 1 (with chassis & cover : 650g max) CN1 Chain: SVH-21T-P1.1 1 AC(L) 1, 23, , 4 -V RC(+) B3P5-VH VHR-5N 2 Tolerance: t1 t0.04 Loose: BVH-21T-P1.1 2 5, 67, , 8 +V RC(-) Dimensions in mm, =inches CN2 Chain: SVH-21T-P1.1 3 AC(N) B8P-VH VHR-8N Loose: BVH-21T-P1.1 CN4 (Option) PCB Material : CEM3 4 Chain: SXH-001T-P0.6 5 FG Pin No. -Z Chassis and cover is optional. CN3 B2B-XH-A XHP-2 (Option) Loose: BXH-001T-P0.6 1 + Mounting torque: 1.5N m(16kgfcm)max 2 COM CN4 Chain: SXH-001T-P0.6 B3B-XH-A XHP-3 (Option) 3 - Loose: BXH-001T-P0.6 (Mfr: J.S.T.) Keep drawing current per pin below 5A(7A at peak load)for CN2 Performance data ( ) ( ) RISE TIME & FALL TIME LEP100F-24 EFFICIENCY LEP100F-24 86 84 ACIN 100V Io=100% 82 DC Output 80 AC Input 78 Load factor100% Load factor 50% 76 60 100 140180 220 260 300 100ms/DIV 20ms/DIV INPUT VOLTAGE V ) ) INPUT HARMONIC CURRENT (LEP100F-24 INPUT HARMONIC CURRENT (LEP100F-24 10 10 Harmonic current standard class A (at odd number) Harmonic current standard class A 1 Load factor 100% 1 (at odd number) Input voltage AC 100V Load factor 100% Input voltage AC 230V 0.1 0.1 0.01 0.01 0.001 0.001 010203040 010203040 HARMONIC ORDER HARMONIC ORDER LEP-3 75 2.95 HARMONIC CURRENT A 32 3max +0.5 5 65- 0.12 1.26 (Lead) 0.2 2.56 (68) 2.68 + -0.5 20 45 1.77 0.79 + 0.5 25- 30 0.98 1.18 HARMONIC CURRENT A EFFICIENCY 4.5 4.5 0.18 0.18 42 20 15 1.65 85 0.79 0.59 3.35 46 1.81