CLD-DS111 REV 1L PRODUCT FAMILY DATA SHEET Cree XLamp XHP50 LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS Powered by Crees groundbreaking SC5 Available in white, configurable to 6V Characteristics ..............................................2 Technology Platform, the XLamp XHP50 or 12V by PCB layout Flux Characteristics, EasyWhite Order LED is a member of Crees Extreme High Available in 5-step EasyWhite bins Codes and Bins .............................................3 Power (XHP) class of LEDs that redefines at 3000K to 5000K CCT, 3-step Flux Characteristics, ANSI White Order lumen density and reliability to radically EasyWhite bins at 2700K to 5000K Codes and Bins .............................................7 reduce system costs by up to 40 percent. At and 2-step EasyWhite bins at 2700K Relative Spectral Power Distribution ........ 11 its maximum current, the XHP50 LED delivers to 4000K CCT Relative Flux vs. Junction Temperature .... 11 twice the light output of the industrys Available in ANSI white bins at Electrical Characteristics ........................... 12 brightest single-die LED, the XLamp XM-L2 3000K to 7000K CCT Relative Flux vs. Current ............................ 13 LED, with similar lumens per watt and Available in standard, 70-, 80-, and Relative Chromaticity vs Current ............... 14 without increasing the package footprint. 90-minimum CRI options Relative Chromaticity vs Temperature ...... 15 The XHP50 LED also achieves longer Binned at 85C Typical Spatial Distribution ........................ 15 lifetime at higher operating temperatures Maximum drive current: 3000mA Thermal Design .......................................... 16 than previous LED technology. The result is (6V), 1500mA (12V) Performance Groups Luminous Flux..... 17 significantly lower thermal, mechanical and Low thermal resistance: 1.2C/W Performance Groups Chromaticity ........ 17 optical costs at the system level. Wide viewing angle: 120 Crees Standard White Chromaticity Unlimited floor life at Regions Plotted on the 1931 CIE Curve .... 21 30C/85% RH Crees Standard Cool White Kits Plotted Reflow solderable - JEDEC on ANSI Standard Chromaticity Regions .. 24 J-STD-020C Crees Standard Warm and Neutral White RoHS and REACh compliant Kits Plotted on ANSI Standard UL recognized component Chromaticity Regions ................................ 25 (E349212) Bin and Order-Code Formats ..................... 26 Reflow Soldering Characteristics .............. 27 Notes .......................................................... 28 Mechanical Dimensions ............................ 30 Electrical Configuration ............................. 32 Tape and Reel ............................................. 32 Packaging ................................................... 33 Copyright 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, Cree, Inc. XLamp , EasyWhite and SC5 Technology are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE.COM/XLAMP XLAMP XHP50 LED CHARACTERISTICS XHP50 LEDs are tested and binned in production in the 12-V configuration. See the Mechanical Dimensions section on page 30 for pad layout options. Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point C/W 1.2 Viewing angle (FWHM) degrees 120 Temperature coefficient of voltage (6V)* mV/C -4.5 Temperature coefficient of voltage (12V) mV/C -9 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 DC forward current (6V)* mA 3000 DC forward current (12V) mA 1500 Reverse voltage V -5 Forward voltage (6V, 1400mA, 85C)* V 5.75 6.3 Forward voltage (12V, 700mA, 85C) V 11.5 12.6 LED junction temperature C 150 Note: * Data for the 6-V configuration is calculated and for reference only. Copyright 2014-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, XLamp , EasyWhite and SC5 Technology are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 2