80547024 Crouzet

02/11/2015 www.crouzet.com 5 Nm 3.5 and 7.2 Watts 7.2 Watts Part number 80547024 Mechanical strength: 5 Nm Constant speed, dependent on supply frequency Direction of rotation controlled by dephasing capacitor Permanent magnet rotor UL, CSA approved comply with IEC standards Part numbers Type Voltage / Frequency Base speed of motor (rpm) Output speed (250 rpm) Ratios Type 7.2 Watts 805470 230-240 V / 50Hz 250 20 12,5 80 547 024 Specifications Motor 825400 Gearbox 810370 Maximum permitted continuous rated gearbox output torque for 1 million revolutions of gearbox output shaft 5 (Nm) Axial load static (daN) 2 Radial load static (daN) 3 Absorbed power (W) 7,2 Motors output (W) 2,65 Maximum temperature rise (C) 55 Ambient temperature (C) -10+70 Weight (g) 860 Wires length mm (approximately) 250 Protection rating IP40 Accessories Voltages/Frequencies F V AC Code Capacitors for motor 825400 230-240 V 50Hz 0,22 5% 480 26231909 115 V - 60Hz 0,56 5% 240 26231822 24 V - 50Hz 22 10% 63 26231703 24 V - 60Hz 15 5% 70 26231728 Dimensions (mm) 805274 - 805470 o Legend N 4 holes depth 12M 7 acroos flat Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com (pushed-in shaft ) 805274 L1 = 59.2 mm L2 = 51.3 mm L3 = 25.6 mm 805470 L1 = 76.6 mm L2 = 65.3 mm L3 = 43 mm Dimensions (mm) Shaft 79206478 o Legend N (pushed-in shaft ) Curves Torque/speed curves 805470 o Legend N RPM Connections In parallel Motors 825204 - 825400 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected