80805001 Crouzet

D.C. geared motors with brushes 5 Nm 10 and 17 Watts A range of D.C. geared motors with solid metal gears. Mechanical rating of gearbox with output shaft stalled : 5 Nm. 10 and 17 Watt motor power. Available in either 12, 24 or 48 V D.C. Gearbox ratios options for 10.5 to 616 rpm. Specifications 17 Watts 17 Watts 10 Watts 10 Watts Type 80 805 0 80 805 0 80 815 0 80 815 0 Voltage 12 V 24 V 12 V 24 V Standard speed (rpm) 2600 rpm 2600 rpm 2600 rpm 2600 rpm Output speed Ratios (i) (rpm) 616 4.22 80 805 0X04.22Z 80 805 0Y04.22Z 80 815 0X04.22Z 80 815 0Y04.22Z 385 6.75 80 805 0X06.75Z 80 805 0Y06.75Z 80 815 0X06.75Z 80 815 0Y06.75Z 339.5 7.66 80 805 0X07.66Z 80 805 0Y07.66Z 80 815 0X07.66Z 80 815 0Y07.66Z 212 12.25 80 805 0X12.25Z 80 805 0Y12.25Z 80 815 0X12.25Z 80 815 0Y12.25Z 170 15.31 80 805 0X15.31Z 80 805 0Y15.31Z 80 815 0X15.31Z 80 815 0Y15.31Z 106 24.5 80 805 0X024.5Z 80 805 0Y024.5Z 80 815 0X024.5Z 80 815 0Y024.5Z 68 38.28 80 805 0X38.28Z 80 805 0Y38.28Z 80 815 0X38.28Z 80 815 0Y38.28Z 53 49 80 805 0X00049Z 80 805 0Y00049Z 80 815 0X00049Z 80 815 0Y00049Z 42.5 61.25 80 805 0X61.25Z 80 805 0Y61.25Z 80 815 0X61.25Z 80 815 0Y61.25Z 21 122.5 80 805 0X122.5Z 80 805 0Y122.5Z 80 815 0X122.5Z 80 815 0Y122.5Z 10.5 245 80 805 0X00245Z 80 805 0Y00245Z 80 815 0X00245Z 80 815 0Y00245Z General characteristics Motor 82 800 0 82 800 0 82 810 0 82 810 0 Gearbox 81 035 0 81 035 0 81 035 0 81 035 0 Maximum permitted torque from 5 5 5 5 gearmotor under continuous conditions (N.m) Axial load (dynamic) daN 6 6 6 6 Radial load (dynamic) daN 6 6 6 6 Max. output (W) 16.3 17 10.3 9.5 Nominal output (W) 15.7 15.6 9.4 8.7 Gearbox case temperature rise (C) 44 40 45 46 Weight (g) 920 920 820 820 Products adaptations, available on request Special supply voltages Special lead lengths Optional encoder Special connectors Special output shafts Special gearbox ratios Special gear material Special output bearings Special mounting plate Products and specifications subject to change without notice. Order/Technical Support - Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 4/34Curves The shaded zone represents the operating range of the geared motor. The horizontal line marks the maximum torque available in continuous duty cycle for a given life. For higher torque ratings, service life will be reduced. Nominal speed and torque curves Nominal speed and torque curves 80 805 0 80 815 0 mN.m mN.m 5000 5000 1000 1000 1 1 100 100 1 2 5 10 100 500 1 2 5 10 100 500 B RPM B RPM Dimensions 80 805 0 1 2 3 128.5 max. 4 4 fixing holes 4.2 B 2 tags IEC 760 series 4.8 x 0.5 mm C D 7 mm 0.1 across flats E (shaft pushed-in ) 80 815 0 Standard 2 1 3 113.5 max. 4 4 fixing holes 4.2 B 4 C 2 tags IEC 760 series 4.8 x 0.5 mm D 7 mm 0.1 across flats (shaft pushed-in ) E Options Gearbox shaft 79 290 064 1 (shaft pushed-in ) B Products and specifications subject to change without notice. Order/Technical Support - Tel: (800) 677-5311 / FAX: (800) 677-3865 / www.crouzet-usa.com 4/35