02/11/2015 www.crouzet.com 42 mm 14 to 31 Watts 14 W Part number 82810501 Usable power: 12 to 22 Watts For high-power drive applications Sintered bronze bearings lubricated for life Power supply by 4.75 mm tags Interchangeable brushes Optional channel encoder Part numbers Type Voltage References Type 82810501 14 W 828105 12 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) 3840 Absorbed power (W) 12 Absorbed current (A) 1 Nominal characteristics Speed (rpm) 2580 Torque (mNm) 45 Usable power (W) 12 Absorbed power (W) 31 Absorbed current (A) 2,6 Gearbox case temperature rise (C) 32 Efficiency (%) 39 General characteristics Insulation class (conforming to IEC 85) F (155C) Protection (IEC/EN 60529) IP20 Max. output power (W) 14 Start torque (mNm) 138 Starting current (A) 6,2 Resistance () 1,94 Inductance (mH) 4,45 Torque constant (Nm/A) 0,0265 Electrical time constant (ms) 2,3 Mechanical time constant (ms) 26 Thermal time constant (mn) 8 2 80 Inertia (g.cm ) Weight (g) 310 Number of of segments 8 Service life (h) 2000 Sintered bronze bearings Replaceable brushes Encoder characteristics Output current (mA) < 25 (25C) Supply (V) 4,530DC Ambient temperature (C) -4085C Made to order products, available on request Built-in interference suppression (828305) Special interference suppression (828005 - 82 8105) Other supply voltages Motor with 1 ball bearing at front (828005 or 82 8105) (essential for vertical motor) Shaft lengths at front and/or rear Reversible 5 pulses/revolution magnetic encoder (1 or 5 pulses/revolution) Other fixing flanges on front or rear Short version possible on 828305 (L = 90 mm) Dimensions (mm) 828005 - 828105 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com o N Legend 2 x M3 at 180, depth 5 mm over 32 2 holes 2.75 at 120 depth 5 mm over 32 2 tags IEC 760, series 4.8 x 0.5 L: 828005: 84.8 mm max. L: 828105: 59.8 mm max. Dimensions (mm) Dimensions with magnetic encoder o N Legend L1: 828005: 99.1 mm max. L1: 828105: 84.1 mm max. Curves 828105 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected